@Article{, title={EFFECT OF STEEL PLATES ON SHEAR STRENGTH OF WIDE REINFORCED CONCRETE BEAMS تأثير صفائح الحديد على مقاومة القص للعتبات الخرسانية المسلحة العريضة}, author={Prof. Dr Amer M. Ibrahim استاذ دكتور عامر محمد ابراهيم and Lect. Dr Wissam D. Salman مدرس دكتور وسام داود سلمان and Asst. Lect Qusay W. Ahmed مدرس مساعد قصي وهاب احمد}, journal={Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة}, volume={19}, number={3}, pages={96-109}, year={2015}, abstract={In this study, shear behavior of reinforced concrete wide beams was investigated experimentally. The experimental program consisted of four wide beams of 45 MPa concrete compressive strength tested with a shear span-depth ratio (a/d) equal to 4.52. One of the tested wide beams had web reinforcement as a control specimen, and the other three specimens had no transverse reinforcement but contained vertical shear steel plates. The flexure mode of failure was secured for all of the specimens to allow for shear mode of failure. The key parameters covered in this investigation were the effect of the existence solid and hollow vertical steel plates on the shear capacity of the tested wide beams. The study shows that the contribution of vertical steel plates to the shear capacity was significant and directly proportional to the existence and direction of the steel plates. The increase in the shear capacity ranged from 9.52% to 47.62% for the range of the tested beams compared with the control beam. Transverse vertical steel plates with voids were more effective in the contribution of the shear strength of wide beams and enhances the ductility of the wide beams.

مقاومة القص للعتبات الخرسانية المسلحة العريضة تم تحريها عمليا, تضمن البرنامج العملي صب وفحص اربع نماذج من العتبات الخرسانية المسلحة العريضة ذات مقاومة انضغاط للخرسانة مقدارها 45 MPa فحصت العتبات بنسبة فضاء قص الى العمق الفعال بمقدار4.52 , كانت احدى هذه العتبات العريضة لها تسليح قص وهي العينة المرجعية, اما العتبات الثلاثة الاخرى فكانت بدون حديد تسليح للقص وانما احتوت على صفائح من الحديد ثبتت بصورة طولية وعرضية لمقاومة القص . نمط الفشل للانثناء قيد او أمن من اجل الحصول على نمط فشل قصي, العوامل الاساسية التي تناولها هذا البحث هي تأثير وجود صفائح الحديد الشاقولية الصلدة والمجوفة على تحمل القص للعتبات العريضة تحت الاختبار. اظهرت الدراسة ان مساهمة صفائح الحديد الشاقولية في تحمل القص مهمة ولها علاقة مباشرة بوجود واتجاه هذه الصفائح. ان زيادة تحمل القص للعتبات تحت الاختبار تراوح (9.52% to 47.62%) مقارنة مع العتبة المرجعية. وان صفائح الحديد الشاقولية بالاتجاه العرضي للعتبة كان لها تأثير ومساهمة اكثر في زيادة تحمل القص للعتبات العريضة وساهم في تحسين المطيلية لها.} }