TY - JOUR ID - TI - Proposed Model for Uniaxial Tensile Behavior of Ultra High Performance Concrete نموذج مقترح لسلوك الشد المحوري للخرسانة المتفوقة الأداء AU - Hisham M. Al-Hassani AU - Wasan I. Khalil AU - Lubna S. Danha PY - 2015 VL - 33 IS - 1 Part (A) Engineering SP - 61 EP - 77 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - This paper investigates experimentally the complete uniaxial tensile stress-strain relationships of Ultra High Performance Concrete (UHPC) and equations for expressing such relationships are obtained. The effects of two variable parameters on the uniaxial tensile behavior are carefully studied which are the silica fume content SF (0%, 10%, 15%, 20%, 25%, and 30%) as a partial replacement by weight of cement, steel fibers volume fraction Vf (0%, 1%, 2% and 3%). The experimental results showed that the two variables of the present investigation have no significant effect on the shape of the ascending part of the stress-strain curve, while the descending part of the curve is found to be considerably affected by the volume fraction Vf of the steel fibers used. Increasing fibers volume fraction Vf from 0% to 3% not only increases the area under the uniaxial tensile stress–strain curve, but also increases both the maximum uniaxial tensile strength by 238.5% and its corresponding strain by about 4044%. Two nonlinear equations are suggested in this research to model the ascending and descending part of the uniaxial tensile stress-strain relationship which are found suitable to represent the uniaxial tensile behavior of the UHPC mixes.

يقدم هذا البحث تحري عملي للعلاقة المتكاملة بين الإجهاد والإنفعال في حالة الشد المحوري لخرسانة متفوقة الأداء, كما تم ايجاد معادلات للتعبير عن هذه العلاقات. تم بعناية دراسة ومناقشة تأثير متغيران, محتوى ابخرة السليكا المكثفة (0%, 10%, 15%, 20%, 25%, 30%) والنسبة الحجمية للالياف الفولاذية (0%, 1%, 2%, 3%). اظهرت النتائج العملية أن المتغيرين للبحث الحالي لم يكن لهما تأثير كبير على شكل الجزء الصاعد من منحنى الإجهاد-الانفعال، في حين وجد أن الجزء النازل من المنحنى يتأثر بشكل كبير بتغير النسبة الحجمية للألياف الفولاذية المستخدمة. كما أظهرت النتائج أن زيادة نسبة الألياف الفولاذية من 0٪ إلى 3٪ لاتؤدي الى زيادة المساحة تحت منحنى إجهاد-انفعال الشد المحوري فحسب وانما تزيد أيضا كل من مقاومة الشد المحوري القصوى بحدود 238.5% والانفعال المصاحب لها بحوالي 4044%. و لقد وجد ان المعادلتين اللاخطية المقترحة لنمذجة الجزء الصاعد والنازل من منحني إجهاد-انفعال الشد المحوري مناسبة لتمثيل سلوك الشد المحوري لخلطات الخرسانة متفوقة الأداء. ER -