TY - JOUR ID - TI - Replacing of Internal Tension Bars by External Bonded Plate ازاحة قضبان الشد الداخلية بصفائح رابطة خارجية AU - Dina Mukheef Hamza دينا مخيف حمزة AU - Rana Hashim Ghedan رنا هاشم غيدان AU - Awadh E. Ajeel عوض عويد عجيل PY - 2011 VL - 15 IS - 3 SP - 91 EP - 103 JO - Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة SN - 25200917 25200925 AB - AbstractThis paper presents comprehensive test data on the effect of replacing internal tension bars by externally bonded steel plate at beam tension face on its cracking pattern, structural deformations and ultimate strength of concrete beams reinforced with external. The experimental work include flexural testing of 100 150 1500mm concrete beams divided into two groups to investigate the mutual action of increasing the plate thickness against its width and vice versa. The test variable included the amount of conventional (internal) reinforcement, percentage of replacing the internal reinforcement with external steel plate and the dimensions of plate. Provided the adhesive layer are chosen carefully and proper gluing techniques are followed The results show that beams reinforced with external steel plate show beam action and composite behavior right up to failure and can be used successfully instead of internal reinforcement of a replacement ratios of removed bars to the original tension bars equal to 33% and 67% in which the steel plates used of wider and thiner than other used plates. There is, however, a limitation to plate thickness beyond which shear/bond failure occurs without the beams achieving their full flexural strength (premature failure).

يقدم هذا البحث دراسة عملية على تأثير استبدال تسليح الشد الداخلي بصفيحة فولاذية خارجية على التشقق , التشوهات الإنشائية و المقاومة القصوى لها. تتضمن هذه الدراسة فحص الانثناء لعتبات خرسا نية (100 150 1500ملم) مقسمة الى مجموعتين للتحقق من التأثير المتبادل لزيادة سمك الصفيحة مع العرض. متغيرات البحث تشمل كمية التسليح الداخلي , نسبة استبدال التسليح الداخلي بالصفيحة الفولاذية الخارجية و أبعاد الصفيحة المستخدمة. حيث أظهرت نتائج هذه الدراسة انه بتوفير الربط المناسب بين سطح الخرسانة و الصفيحة الفولاذية يمكن استخدام هذه الصفائح بنجاح بدلا من التسليح الداخلي التي بها نسبة الاستبدال للحديد المرفوع الى الحديد الاصلي مساوي الى 33% و 67% والتي بها الصفائح اعرض و انحف من بقية الصفائح المستخدمةفي النماذج الاخرى لذلك لابد من ضرورة تحديد سمك الصفيحة المناسب لمنع حدوث فشل في منطقة ارتباط الصفيحة بالوجه الخرساني قبل الوصول للمقاومة القصوى للعتبة. ER -