TY - JOUR ID - TI - Effect of Zinc Oxide Level on Tensile Properties of a NR/SBR Composite تأثير اوكسيد الزنك على خواص الشد لمتراكب من المطاط الطبيعي ( NR ) ومطاط ستايرين-بيوتادين SBR AU - Fadhil Abbas Hadi فاضل عباس هادي AU - Ali Hassan.R.H Al-Azzawi علي حسن رسن AU - Hassan.H Al-Allaq حسن هادي علي العلاق PY - 2015 VL - 7 IS - 1 English and Arabic SP - 53 EP - 63 JO - Journal of Kufa - physics مجلة الكوفة للفيزياء SN - 20775830 23126671 AB - The aim of this work is studying the effect of zinc oxide level on tensile properties of the compounds. Since the compounds consist of natural rubber (NR) and styrene-butadiene rubber (SBR) with ratio (50:50).This work included studying the replacing of conventional zinc oxide by nano-zinc oxide as an activator has small particle size and large surface area in comparison with conventional zinc oxide so as to improve tensile properties and reduce the amount of zinc oxide inside the compounds. In this work, two groups of compounds are prepared:•Six compounds have conventional zinc oxide as an activator with concentrations (0,2,4,5,6,8 phr (part per handred)).•Nine compounds have nano-zinc oxide as an activator with concentrations (0,0.2,0.4,0.6,0.8,1,1.2,1.4,1.6 phr). The compounds were prepared by two-roll mill and laboratory press. Dumbbells (test samples) of tensile test are prepared by Wallace. Test Specimens Cutting Press. Tensile test carried out by Monsanto T10 Tensometer. Crosslink density tested by swelling the samples of the compounds by toluene and using Flory- Rehner equation. The results refer to the maximum values of tensile properties of a NR/SBR blend with conventional zinc oxide at (5 phr) of zinc oxide level. The maximum values of tensile properties with nano-zinc oxide at (1.2 phr) of zinc oxide level. The replacing conventional zinc oxide by nano-zinc oxide reduces the cost of the compounds by reducing the amount of zinc oxide inside the compounds and improves the tensile properties.

الفكرة الأساسية للبحث هي التعرف على تأثير تركيز اوكسيد الزنك على خواص الشد Tensile properties (قوة الشدTensile Strength ,معامل المرونة Elastic Modulus,والاستطالة Elongation) لعجنات مطاطية مؤلفة من المطاط الطبيعي NR)) والمطاط الصناعي (SBR) بنسب متساوية.وللتعرف على إمكانية استبدال اوكسيد الزنك الاعتيادي باوكسيد الزنك النانوي كمادة منشطة ذات حجم دقائق اصغر ومساحة سطحية اكبر (مقارنة باوكسيد الزنك الاعتيادي) ولغرض استثمار هذه الخواص في تحسين خواص الشد ولتقليل كمية اوكسيد الزنك في العجنات المطاطية. حضرت في هذا البحث مجموعتين من العجنات المطاطية والتي يمكن تصنيفها بالصورة التالية: ست عجنات كان العامل المنشط فيها هو اوكسيد الزنك الاعتيادي وقد أضيف للعجنات الست بتراكيز مختلفة هي phr 8,6,5,4,2,0)(جزء من مائة من وزن المطاط)).2.تسع عجنات كان العامل المنشط فيها هو اوكسيد الزنك النانوي وقد اضيف للعجنات التسع بتراكيز مختلفة هي phr1.6 ,1.4,1.2,1,0.8,0.6,0.4,0.2, 0 )). أجريت عملية تحضير العجنات باستخدام عصارة ذات رولة مزدوجة ومكابس مختبرية.تم تحضير نماذج فحص الشد باستخدام جهاز( (Wallace Test Specimen Cutting Press. أجريت عملية فحص خواص الشد باستخدام جهاز التنسومتر Monsanto T10 Tensometer)). كثافة الترابط (Crosslink Density) تم فحصها لجميع العجنات باستخدام معادلة فلوري-رينر عن طريق فحص الانتفاخ وباستخدام مذيب جيد هو التولوين. بينت نتائج الفحص ان التركيز الأمثل لمادة اوكسيد الزنك الاعتيادي لعجنات مطاطية مكونة من المطاط الطبيعيNR) ) والمطاط الصناعي SBR)) (بنسب متساوية) وللحصول على خواص شد افضل هو 5 phr)). كما أشارت الى ان التركيز الأمثل لمادة اوكسيد الزنك النانوي لعجنات مطاطية مكونة من المطاط الطبيعيNR) ) والمطاط الصناعي SBR)) (بنسب متساوية) وللحصول على خواص شد افضل هو 1.2phr)).ان استبدال اوكسيد الزنك الاعتيادي باوكسيد الزنك النانوي يساهم في تحقيق مجموعة من المميزات ابرزها تحقيق جدوى اقتصادية من خلال تقليل كلف العجنات اضافة الى تحسينه خواص الشد وهذه النتيجة تتضح من خلال مقارنة فحوصات العجنات التي تم تحضيرها لتبين لنا تلك المميزات . ER -