@Article{, title={Shear Behavior of Hybrid Reinforced Concrete I-Beams Containing Steel Fiber Reinforced Concrete (SFRC)and High Strength Concrete (HSC تصرف القص للاعتاب الخرسانية المهجنة المسلحة الالياف}, author={Ali H. Aziz علي حمبد عزيز and Bayan S. Al-Nu’man بيان سلمان عبيد and Husain M. Husainl حسين محمد حسين}, journal={Journal of Engineering and Sustainable Development (JEASD) مجلة الهندسة والتنمية المستدامة}, volume={10}, number={4}, pages={36-52}, year={2006}, abstract={This study presents experimental and theoretical investigation of shear behavior of hybrid reinforced concrete I-beams cast monolithically, but, the web is made with concrete differing from concretes of compression and tension flanges.A rational way has been used by replacing (or strengthening) a certain part(s) or layer(s) of I-shaped reinforced concrete beams by steel fiber reinforced concrete (SFRC) or high strength concrete (HSC). Three beams were tested in this investigation and only the concrete type of the web was varied. Experimental results showed that the ultimate shear strengths are increased (15 or 25%), while the reserve shear strength (after diagonal cracking) is increased (6 or 10%) for the tested beams containing SFRC or HSC in the web respectively. Crack arrest mechanism of steel fibers, and high compressive strength of concrete improved the tensile response, limited crack propagation, improved reserve strength and altered the failure mode. So, more safety was obtained.ANSYS finite Element models are used to simulate all tested beams. Three dimensional nonlinear brick element (solid element) was used to model the concrete, while, the steel reinforcement was modeled by discrete bar element.It was found that the general behaviors of the finite element models showed good agreement with observations and data from the experimental tests.

تقدم هذه الدراسة بحثا عمليا ونظريا لتقصي سلوك القص للعتبات الخرسانية المسلحة الهجينية ذات المقطع -I- المصبوبة بشكل كامل والتي تكون فيها خرسانة الوترة (Web) مختلفة عن خرسـانة شـفة الضغط و خرســانة شـفة الشـد (Tension and Compression Flanges).تم استخدام طريقة منطقية وذلك بإبدال (تقوية) جزء معين من المقطع -I-، (الوترة)، بخرسانة مسلحة بألياف الحـديد(SFRC) أو خرســانة عـالية الانضغاط (HSC). في هذه الدراسة، تم فحص ثلاثة عتبات كانت فيها خرسانة الوترة متغيرة.أظهرت النتائج المختبرية زيادة في مقاومة القص (15 أو 25%) وزيادة في مقاومة القص المؤمن ((Reserve Shear Strength (6 أو 10%) للعتبات ذات الوترة ((Web المقواة بالخرسانة المسلحة بألياف الحديد أو المقواة بالخرسانة عالية الانضغاط على التوالي. لتقصي سـلوك العتبات المفحوصة تحليليا، تم استخدام برنامج العناصر المحددة (ANSYS) لإنشاء نماذج رياضية معتمدة على العناصر المحددة ثلاثية الأبعاد اللاخطية لتمثيل الأجزاء الخرسانية وعناصر منفصلة (Discrete Elements) لتمثيل قضبان التسليح.أظهرت النتائج بشكل عام حصول توافق جيد بين نتائج العناصر المحدودة مع النتائج المختبرية.} }