@Article{, title={Influences of the Twisted Strips Insertion on the Performance of Flat Plate Water Solar Collector تأثير ادخال شرائط ملتوية على اداء مجمعات الماء الشمسية المسطحة}, author={Jafar M. Hassan جعغر مهدي حسن and Qussai J. Abdul-Ghafour قصي جهاد عبد الغفور and Mohammed F. Mohammed محمد فوزي محمد}, journal={Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية}, volume={11}, number={3}, pages={37-46}, year={2015}, abstract={In order to enhance the efficiency of flat plate solar water collectors without changing in its original shape and with low additional cost, twisted strips are inserted inside its riser pipes. Three flat plate collectors are used for test. Family of twisted strips are inserted inside each collector risers with different twisted ratios (TR=3,4,5). The collectors are connected in parallel mode (Z-Configuration) and are exposed to the same conditions (solar radiation and ambient temperature) .The experimental results show that, the highest heat transfer rate occurs at twisted ratio (3) .Consequently, for the same twisted ratio the daily efficiencies for the solar collector at different flow rate used (60,100 and 150) ℓ /hr. were 49 %, 57% and 63% respectively.

لغرض تحسين كفاءة مجمعات الماء الشمسية المسطحة بدون احداث تغيير في الشكل الاصلي مع اضافة بسيطة للتكلفة، تم اقحام شرائط ملتوية داخل انابيب رفع الماء. تم استخدام ثلاثة مجمعات شمسية مسطحة لغرض الدراسة. حيث وضعت مجموعة من الشرائط الملتوية مختلفة في نسبة الالتواء (TR=3,4,5) داخل انابيب رفع الماء لكل مجمع . تم ربط المجمعات على التوازي (شكل –Z ) وتعريضها للضروف نفسها (شدة الاشعاع الشمسي و درجة حرارة المحيط). اوضحت النتائج العملية ان اعلى معدل لانتقال الحرارة حصل عند نسبة التواء (3). ونتيجة لذلك و لنسبة الالتواء نفسها كانت قيمة الكفاءة اليومية للمجمع الشمسي لعدد من قيم معدل الجريان (60,100,150) لتر/ ساعة بلغت 49% ،57% و63% على التوالي .} }