@Article{, title={Desulfurization of AL-Ahdab Crude Oil using Oxidative Processes ازالة الكبريت من نفط خام الاحدب بأستخدام عملية الاكسدة}, author={Neran Khalel Ibrahim نيران خالد ابراهيم and Saja Mohsen Jabbar سجا محسن جبار}, journal={Journal of Engineering مجلة الهندسة}, volume={21}, number={7}, pages={102-112}, year={2015}, abstract={Two different oxidative desulfurization strategies based on oxidation/adsorption or oxidation/extraction were evaluated for the desulfurization of AL-Ahdab (AHD) sour crude oil (3.9wt% sulfur content). In the oxidation process, a homogenous oxidizing agent comprising of hydrogen peroxide and formic acid was used. Activated carbons were used as sorbent/catalyst in the oxidation/adsorption process while acetonitrile was used as an extraction solvent in the oxidation/extraction process. For the oxidation/adsorption scheme, the experimental results indicated that the oxidation desulfurization efficiency was enhanced on using activated carbon as catalyst/sorbent. The effects of the operating conditions (contact time, temperature, mixing speed and sorbent dose) on the desulfurization efficiency were examined. The desulfurization efficiency measured at the best operating conditions(optimum conditions): 60 , 500rpm, 60min contact time and sorbent dose of 0.7g AC/100 ml AHD crude, was 32.8% corresponding to a sulfur content of 2.6 wt%. Applying the same optimum operating conditions and at 3:1 solvent/oil ratio, the oxidation/extraction method gave comparable desulfurization efficiency of 31.5%.

في هذا البحث تم تقييم نوعين من عمليات الأكسدة لأزالة مركبات الكبريت من نفط خام الأحدب الحامضي (محتوى كبريتي = ( 3.9 wt% وهي العمليات المستندة الى عمليات الأكسدة/الأمتزاز أو الأكسدة/ الأستخلاص. في عملية الأكسدة تم استخدام نظام بيروكسيد الهيدروجين /حامض الفورميك كمادة مؤكسدة. استخدم الكاربون المنشط كعامل مساعد / كمادة مازة في عملية الآكسدة/امتزاز بينما استخدم الأسيتونايترايل كمذيب في عملية الآكسدة/ أستخلاص. دلت النتائج على ان الكاربون المنشط كان له دور كبير في زيادة كفاءة عملية الآكسدة/امتزاز. تم دراسة تأثير المتغيرات العملية (زمن التلامس، درجة الحرارة، سرعة الخلط، وكمية المادة المازة) على كفاءة عملية الأكسدة/ الأمتزاز . كانت كفاءة عملية الأكسدة/ امتزاز في افضل ظروف العمل ( 60 ، 500rpm، 60min، 0.7g كاربون منشط لكل 100ml من النفط الخام) تقريبا 32.8% (محتوى كبريتي= 2.6wt%) وهي مقاربة لكفاءة عملية الأكسدة/الأستخلاص 31.5%) ) والتي اجريت تحت نفس الظروف العملية وباستخدام نسبة 3:1 مذيب/نفط خام.} }