TY - JOUR ID - TI - Indoor Investigation for Improving the Hybrid Photovoltaic /Thermal System Performance Using Nanofluid (AL2O3-Water) دراسة مختبرية لتحسين اداء المنظومة الحرارية الكهروضوئية الهجينة باستخدام مائع اوكسيد الالمنيوم النانوي AU - Hashim A. Hussien AU - Ali H. Noman AU - Abdulmunem Raad Abdulmunem PY - 2015 VL - 33 IS - 4 Part (A) Engineering SP - 889 EP - 901 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Hybrid Photovoltaic/Thermal system (PV/T) wasdesigned and implemented to investigate the improving of the electrical and thermal efficiency by using nanofluids. The electrical efficiency reduced due to the significant reduction in the maximum power of the photovoltaic panel under rising temperature, for this reason, the payback period of the PV system is extended and the lifespan of the PV module may also be shortened. In order to resolve this problem, cooling technique can be utilized effectively dissipate the heat from the PV module. An experimental rig is designed which is consisting of a heat exchanger and working fluid circulating pipes are placed at PV rear surface. Forced cooling using (AL2O3-Water) nanofluid with different concentration ratios tests is utilized to reduce the operating temperature of PV.The results indicated that using base fluid, the temperature of the PV module was (79.1oC) and a conversion efficiency of about (8 %.).While using nanofluid at different concentration ratios (0.1- 0.5 step 0.1) % at constant mass flow rate (0.2 l/s), the temperature is more dropped significantly to (42.2oC) at concentration ratio (0.3%) and led to increase in the efficiency of solar panel to (12.1%), but when increasing of concentration ratios more than (0.3%) that led to increase PV temperature to (52.2oC) and led to a decrease of PV efficiency to (11.3%). The heat which was extracted from the PV module by the cooling nanofluid can contribute to the overall energy output of the system.

المنظومة الهجينة (PV/T) صممت ونفذت للتحقق عمليا من امكانية تحسين كفاءتها الكهربائية والحرارية باستخدام تقنية التبريد بالمواد النانوية . ان الكفاءة الكهربائية تنخفضنتيجة ارتفاع درجة الحرارة في اللوح الشمسي ولهذا السبب فان فترة الاسترداد للنظام وعمر اللوح الشمسي قد تقل . تقنية تبريد اللوح الشمسي بالماءاستخدمت لحل هذه المشكلة لتبديد الحرارة من اللوح الشمسي . تقنية التبريد عمليا تكونت من مبادل حراري وانابيب ماء وضعت على السطح الخلفي للوح الشمسي وبتبريد قسري باستخدام اوكسيد الالمنيوم النانوي وبتراكيز مختلفة تم تحضيرها واستخدمت لتقليل درجة الحرارة .النتائج بينت بدون استخدام اوكسيد الالمنيوم النانوي مع الماء فان درجة حرارة اللوح الشمسي كانت (79.1oC) والكفاءة الكهربائية لاتتعدىتقريبا 8% بينما عند استخدام اوكسيد الالمنيوم النانوي وبتراكيز مختلفة (0.1- 0.5 step0.1)% وبثبات جريان المائع عند (0.2L/s)فان درجة الحرارة انخفضت الى درجة (42.2oC) عند نسبة تركيز (0.3%) مما ادى الى زيادة بالكفاءة الكهربائية للمنظومة بقيمة اكثر من (12.1%)ولكن عند زيادة نسبة التركيز اكثر من (0.3%) فان درجة الحرارة قد ازدادت الى (52.2oC) وقلت الكفاءة الى (11.3%). الحرارة التي بددت من اللوح الشمسي باستخدام تقنية التبريد باستخدام النانو بامكانها ان تزيد الطاقة الكلية الخارجة من المنظومة الهجينة . ER -