TY - JOUR ID - TI - Behavior of Reinforced Concrete Flat Plate with Embedded Bearing Plate تصرف البلاطات الخرسانية المسلحة المستوية مع صفيحة التحمل المطمورة AU - Sabih Z. Al-Sarraf AU - Jamal S. Abd Al-Amier AU - Jawad K. Al-Bayati PY - 2015 VL - 33 IS - 4 Part (A) Engineering SP - 985 EP - 1001 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - This study presents an experimental investigation on the influence of embedded shearhead reinforcement (steel plate) on the punching shear strength of reinforced concrete slabs.This work includes the investigation and testing of one control slab and five scale models of slab-column connection simply supported along the four edges. A shearhead was made by using a steel plate with T-section stiffeners, the stiffeners were fabricated to be with two lines welded on the tension face of the plates. The main variables studied were the dimensions and thickness of the steel plate (used as punching resistance) .The results show that ultimate load capacity at failure increases by (16.48%) over the reference slab. Also, punching shear stress decreases about (29.24%) below the reference slab.

تقدم هذه الدراسة بحثا عمليا على البلاطات المستوية التي تحتوي على تسليح قص، هذا التسليح يتضمن استخدام صفائح حديدية مطمورة في البلاطة. يتضمن الفحص عتبة سيطرة واحدة و خمسة بلاطات ذات إسناد بسيط على حوافها الأربعة وتتكون هذه البلاطات من صفيحة حديدية مقواة بخطين مزدوجين من مقاطع حديدية ذات مقطع حرف (T) لكلا الاتجاهين، وكانت المتغيرات الأساسية هي تأثير أبعاد وسمك الصفائح الحديدية على مقاومة البلاطة للقص الثاقب. اظهرت النتائج بان خصائص المقاومة والتشوهات تتأثر نتيجة تغير سمك وأبعاد الصفيحة الحديدية، كذلك فأن قيمة الحمل الاقصى عند الفشل ازدادت بمقدار(16.48)% عن البلاطة المرجعية ونقصان باجهادات القص بمقدار(29.24)% عن البلاطة المرجعية . ER -