@Article{, title={Numerically and Theoretically Studying of the Upper Composite Complete Prosthetic Denture دراسة تحليلية ونظرية لطقم الاسنان الاصطناعي الكامل المتراكب العلوي}, author={Sihama I. Salih and Jawad K. Oleiwi and Qahtan A. Hamad}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={33}, number={5 Part (A) Engineering}, pages={1023-1037}, year={2015}, abstract={The current study focused on the manufacturing and development properties of upper prosthesis complete denture from composite materials with the basis cold cured resin of poly methyl methacrylate as new fluid resin and reinforced materials by two different types of particles (nano-hydroxyapatite (nHA), micro zirconia (ZrO2)), that added with different volume fractions of (1%, 2% and 3%), and the different types of woven fibers (Glass fiber, Kevlar fiber), it were added with a fixed volume fraction of (5%) to PMMA composites.Specimens’ consist of a six groups where prepared by using (Hand Lay-Up) method from the composites materials and hybrid laminated composites materials. This research includes theoretical and numerical studies by using finite element method to confirming the experimental results of the effect of selected volume fractions of theseparticles and fibers on the (total deformation distribution, equivalent elastic strain and equivalent Von Mises stress) of the composite prosthetic dentures.The theoretical part included calculations the values of theoretical safety factor and Poisson's ratio. While the numerical part based on finite element method (F.E.M), which was performed by using program (ANSYS-15) to analyze the prepared of denture composite materials and evaluate its characteristics which represent total deformation distribution, equivalent stress and equivalent elastic strain. This was performed by obtaining twenty one models for the PMMA composite dental prostheses which were treated as three dimension structure. The numerical results of the F.E.A showed coincided with some of the experimental results.

في هذا البحث تم التركيز على تصنيعوتطوير مواصفات طقم أسنان أصطناعي كامل علوي من مواد متراكبة. وقد حضرت هذه المواد المتراكبة من راتنج البولي مثيل ميثا اكريليت على شكل راتنج سائل جديد معالج ذاتياً كمادة أساس وقد تم تقويتها بنوعين مختلفين من الدقائق تضمنت دقائق الهيدروكسي اباتايت النانوية ودقائق الزركونيا الميكروية تم اضافتهما بكسور حجمية مختلفة هي (1%, 2% and 3%)، ونوعين مختلفين من الالياف الحصيرية الثنائية الاتجاه هي الياف الزجاج والياف الكفلر والتي تمت اضافتها الى المواد المتراكبةبكسر حجمي ثابت هو (%5)الى المواد المتراكبة. تتكون العينات من ستة مجاميع تم تحضيرها باستخدام طريقة الصب اليدوي تمثل مواد متراكبة ومواد متراكبة طبائقية هجينية. تضمن البحث دراسة نظرية وتحليلية باستخدام طريقة العناصر المحددة للتاكد من النتائج العمليةلتأثير الكسور الحجمية المختارة لهذه الألياف والدقائق على (توزيع التشوه الكلي، الانفعال المرن المكافيء والاجهاد المكافيء) لأطقام الاسنان الأصطناعية المتراكبة.تضمنتنتائج الجانب النظري حساب قيم معامل الامان النظريونسبة بويزن. أما الجانب التحليلي فيتضمن أستخدام أستخدام طريقة العناصر المحددة والتي أنجزت بأستخدام برنامج(ANSYS-15) لغرض تحليل المواد المتراكبة المحضرة لطقم الأسنان وحساب خصائصه والتي تمثل (توزيع التشوه الكلي، الاجهاد المكافيء والانفعال المرن المكافيء)، وقد تم انجاز ذلك عن طريق الحصول على واحد وعشرون موديل لطقم الاسنان الأصطناعي باعتبارها أطقام أسنان متراكبة مكونة من راتنج البولي مثيل ميثا اكريليت ذات هيكل ثلاثي الابعاد، وقد أظهرت النتائج التحليلية لطريقة العناصر المحددة تطابق مع بعض النتائج العملية.} }