TY - JOUR ID - TI - The Effect of Autoclave Processing on Some Properties of Cross-Linked Acrylic Denture Base Material تاثير المعالجة بالموصدة على بعض خصائص الاكريليك المتشابك المستخدم كقاعدة لطقم الأسنان AU - Husam Mejbel Khalaf حسام مجبل خلف PY - 2015 VL - IS - 36 SP - 305 EP - 325 JO - Al-Rafidain University College For Sciences مجلة كلية الرافدين الجامعة للعلوم SN - 16816870 AB - Background: Impact strength, surface hardness, water sorption and solubility are important properties for cross linking acrylic resin as denture base material so it is important to evaluate these properties after autoclave processing.Objectives: The aim of this research is to investigate the effect of different time durations of autoclave processing on some physical and mechanical properties of cross linking acrylic denture base materials.Materials and methods: Heat cured cross link acrylic was the acrylic denture base material included in this study. Total of (108) specimens were prepared. The specimens were grouped into: control group in which acrylic resin processed by conventional water bath processing technique and experimental groups in which acrylic resins processed by autoclave at 121°C, 210 KPa. The experimental groups were divided into group 1 (Fast) for 15 minutes. and group 2 (Slow) for 30minutes to study the effect of the autoclave processing, four tests were conducted: impact strength (Charpy tester), surface hardness (shore D), and water sorption and solubility test.Result: The results were analyzed by ANOVA. There were no significant differences between the results of the processing techniques regarding impact, hardness, and water sorption and solubility tests.Conclusions: The autoclave processing technique might also be a good alternative to the conventional water bath processing technique regardless to the cycle of autoclave processing either fast or slow.

قوة الصدمة، وصلادة السطح، وامتصاص الماء والذوبان هي من الخصائص الهامة للاكريليك المتشابك كمادة قاعدة طقم الأسنان لذلك من المهم تقييم هذه الخصائص بعد المعالجة بالموصدة.الهدف من هذا البحث: هو دراسة تأثير فترات زمنية مختلفة من معالجة المُوصَدة على بعض الخصائص الميكانيكية والفيزيائية للاكريليك المتشابك كمادة قاعدة طقم الأسنان.المواد والطرق: تم استعمال الاكريليك المتشابك المعالج حراريا في هذه الدراسة. المجموع الكلي للعينات التي تم تحضيرها هو 108. تم تقسيمها الى : مجموعة التحكم وفيها تم معالجة الاكريليك بحوض الماء التقليدي ومجموعات تجريبية تم فيها معالجة الاكريليك بالموصدة عند درجة حرارة 121° وضغط 210 كيلوباسكال. تم تقسيم المجموعات التجريبية الى المجموعة الاولى (المعالجة السريعة) لمدة 15 دقيقة والمجموعة الثانية (المعالجة البطيئة) لمدة 30 دقيقة لدراسة تأثير معالجة الموصدة. أجريت أربعة اختبارات: قوة الصدمة، والصلادة السطحية واختبارامتصاص الماء واختبار الذوبان.النتائج: عدم وجود فروق ذات دلالة إحصائية بين نتائج انواع المعالجة فيما يتعلق بقوة الصدمة، وصلادة السطح، وامتصاص الماء والذوبان.الاستنتاجات: المعالجة بالموصدة قد تكون أيضا بديلا جيدا للمعالجة بحوض الماء التقليدي بغض النظر عن مدة المعالجة سريعة كانت أو بطيئة. ER -