TY - JOUR ID - TI - Heat Transfer Characteristics of a Fluid Flow in Multi Tube Heat Exchanger Fitted with Perforated Fins خصائص انتقال الحرارة لمائع يجري خلال مبادل حراري متعدد الانابيب مجهز بزعانف مثقبة AU - Ayad Dawood Suliman اياد داؤد سليمان AU - Dhia Al-Deen Hussain Alwan ضياء الدين حسين علوان AU - Nabil Jamil Yasin نبيل جميل ياسين PY - 2015 VL - 21 IS - 11 SP - 40 EP - 59 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The heat transfer and flow resistance characteristics for air flow cross over circular finned tube heat exchanger has been studied numerically and experimentally. The purpose of the study was to improve the heat transfer characteristics of an annular finned-tube heat exchanger for better performance. The study has concentrated on the effect of the number of perforations and perforations shapes on the heat transfer and pressure drop across a staggered finned tube heat exchanger. The Numerical part of present study has been performed using ANSYS Fluent 14.5 using SST Turbulent model, while the experimental study consist from a test rig with different models of heat exchangers and all required measurement devices were building up to cover the experimental work for the range of Reynolds number (7500-17500). The experimental results show that average Nusselt number of the six circular perforations fins model is about 11.08 % higher than that for solid fin model and with triangular perforations model is about 10.12 % higher than that for the solid fin. Triangular perforation finned heat exchanger model gives a best result than the other models due to excessive increment in the )Nu( in comparison with other models take in consideration pressure drop. The results were validated with previous work and the comparison between the experimental and numerical shows a good agreement with a maximum deviation ±10% between them.

تمت دراسة خصائص انتقال الحرارة ومقاومة الجريان للهواء المار عبر مبادل حراري مزعنف نظرياً وتجريبياً. الغرض من هذه الدراسة هو محاولة تحسين خصائص انتقال الحرارة لمنظومة انابيب حلقية الزعانف للحصول على اداء افضل. ركزت الدراسة على معرفة تأثير عدد الثقوب واشكالها على عملية انتقال الحرارة وانخفاض الضغط خلال مبادل حراري من النوع المتخالف الترتيب. في الدراسة النظرية تم انشاء الشبكة باستخدام برنامجANSYS Fluent.14 مع موديل الجريان الاضطرابي SSTبينما تضمن العملي ضمن ال بناء جهازتجريبي يحتوي كافة نماذج المبادل الحراري المصنعة وجميع اجهزة القياس المطلوبة لغرض الدراسة التجريبية ضمن حدود عدد رينولد (7500-17500). اظهرت النتائج التجريبية ان عدد نسلت للزعانف الحاوية على ستة ثقوب دائرية اعلى بحدود 11.08% من الزعانف الغير مثقبة, في حين ان عدد نسلت كان اعلى بمقدار 10.12% للزعانف الحاوية على أربع ثقوب مثلثية عن الزعانف الغير مثقبة. كذلك اظهرت الدراسة ان نتائج الزعانف ذوات الثقوب المثلثة هي الافضل بالمقارنة مع باقي النماذج نظراً للزيادة الملحوضة في عدد نسلت بالاخذ بنظر الاعتبار الزيادة في انخفاض الضغط. تمت مقارنة النتائج النظرية مع بحوث سابقة وكذلك اجريت مقارنة بين النتائج النظرية والتجريبية وقد اظهرت تقارباً مقبولاً بينهما بانحراف لا يتعدى ±10%. ER -