TY - JOUR ID - TI - Selecting the Optimum Graphical Method to Find Aggregate Blend Proportions in the Production of HMA أختيار طريقة الرسم البياني المثلى لايجاد نسب خلط الركام في انتاج المزيج الاسفلتي الساخن AU - Talal Hussien Fadhil PY - 2015 VL - 33 IS - 7 Part (A) Engineering SP - 1636 EP - 1655 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - The proportions of aggregate directly affect the performance of HMA depending on their shape, texture, and strongly on the gradation.The determination of aggregate proportions depends strongly on the number of aggregate typesto be blended, and the limits of the desired gradation.In this research, ten samples had been taken from different text books and papers. Each one contains three types of aggregates; coarse, fine, and filler. The samples were solved individually by seven different methods; five of them by graphical method, the sixth method was solved by running MATLAB, and the last method by using Excel sheet. In this research, five graphical methods were applied, and the aim of using them is to find graphically the tentative blending values and then compare their results individually with optimum values which was found from an Excel spreadsheet, and finally selecting the optimum method. For this purpose, more than 210 readings were utilized.SPSS program was run two times. In the first run, the values of person correlation (r) of method,Balanced-Areas (Rothfuchs), Walace, Equal Distance, Triangular, and Asphalt Institute when correlated with optimum values were 0.973, 0.964, 0.958, 0.953, and 0.869, respectively. In the second SPSS run, the values of samples No.4 and No.10 were removed because they gave zeros readings, the person correlation of Triangular, Balanced-Area, Walace, Equal Distance, and Asphalt Institute methods were 0.972, 0.970, 0.959, 0.952, and 0.869, respectively.In this research, It has been found that the Equal Distances method would be considered as an accurate, fast, and even easy method, and can be used for any number of aggregate.

خصائص الركام تؤثر بشكل مباشر على أداء HMA اعتمادا على شكلها، والملمس، وبقوة على نوع التدرج المطلوب. ان تحديد نسب خلط الركام يعتمد بشدة على عدد انواع الركام المشترك لتكوين الخليط، وحدود تدرج المواصفات المطلوبة. في هذا البحث، تم استخدام عشرة عينات من خلطات ذات تدرج معلوم اخذت من كتب وبحوث مختلفة. كل واحد منها يحتوي على ثلاثة أنواع من الركام. الخشنة، الناعمة، والفلر. تم حل العينات بشكل فردي عن طريق سبع طرق مختلفة؛ خمس منها باستخدام الأساليب البيانية،والطريقة السادسة عن طريق تطبيق برناج MATLAB، والأسلوب الأخير باستخدام برنامج الاكسل. في هذا البحث، استخدمت خمس طرق من طرق الرسم البياني والهدف منها هو العثور بيانيا على قيم مزج مؤقتة ومن ثم مقارنتها بشكل فردي مع القيم المثلى التي وجدت من بيانات لبرنامج إكسل، وأخيرا اختيار الطريقة الأمثل. لهذا الغرض تم استخدم أكثر من 210 قراءات. تم تشغيل برنامج SPSS مرتين. في المرة الأولى، كانت قيم ارتباط بيرسون (r) لطريقة المساحات المتساوية (روفيوجس)، والاس، المسافات المتساوية، المثلث، ومعهد الأسفلت عندما يتم مقارنتها مع القيم المثلى هي 0.973، 0.964، 0.958، 0.953، 0.869 على التوالي. و في المرة الثانية لاستخدام SPSS، أزيلت قيم عينات رقم 4 و 10 بالكامل لأنها أعطت قيم أصفارا لبعض القراءات لطريقتين، كانت قيم ارتباط بيرسون (r) عند مقارنتها مع القيم المثلى لطريقة المثلث، المساحات المتساوية ، والاس، المسافات المتساوية، وأساليب معهد الأسفلت كانت 0.972، 0.970، 0.959، 0.952 و0.869 على التوالي. في هذا البحث تبين ان طريقة المسافات المتساوية دقيقة وسهلة وسريعة، ويمكن استخدامها لأي عدد من المجاميع. ER -