@Article{, title={Fabrication and Investigation of Nanostructured Monolayer Porous Silicon (PSi) Based for Silicon Solar Cell Applications التحقق من الخصائص الكهروضوئية للسلكون المسامي}, author={Saad A. Mohammed Salih سعد عبد العزيز محمد and Mayameen S. kadhim ميامين سلمان كاظم}, journal={Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية}, volume={18}, number={2}, pages={309-314}, year={2015}, abstract={Fabrication of PSi is generated successfully depending upon photo-electrochemical etching process. The purpose is to differentiate the characterization of the PSi monolayer based on c-silicon solar cell compared to the bulk silicon alone. The surface of ordinary p-n solar cell has been reconstructed on the n-type region of (100) orientation in order to enhance the conversion efficiency. The process relied on varying the etching time with fixed current density. The other process conditions were kept constant, for instance, HF concentration, current density, temperature,etc. The role of different laser types and powers illuminated the n-region has been realized. In particular, the blue laser (473nm of two powers 50 and 100mW) appears to be the most operative wavelength to obtain the optimum efficiency and pore sizes as well as the etching rate. The samples were tested and characterized by the (I-V).Measurement and analyzed by SEM, PL and AFM tests. The obtained solar cell efficiency was in the range of 11% compared to the typical solar cell efficiency which was (3.34%).

هدف هذه الدراسة تحضير طبقة السلكون المسامي على الوجه (n) من مفرق (p-n) المكون للخلية الشمسية الذي تكون الاضاءة من متطلبات التفاعل عنده ثم التحقق من امواصفات الجديدة للخلية الشمسية بعدة وسائل مختلفة مثل : SEM و PL و AFM. استعمل في التحضير خليط من حامض الهيدروفلوريك والايثانول اضافة الى الماء بنسبة (2:3:3) وضوء الليزر باطوال موجية و قدرات مختلفة في خلية مصنعة محليا من التفلون فيما يسمى طريقة التنميش الضوئي- الكهروكيميائي وضع السلكون فيها كقطب الانود اما الكاثود فكان من البلاتينيوم. هنالك عوامل متعددة تؤثر في هذا التفاعل اخترنا اهمها وهو زمن التنميش (10,15,20,25 ) دقيقة في حين ثبتنا بقية الاعلومات. برز الليزر الازرق (nm473) كافضل انواع الليزرات المستعملة التي اعطت افضل النتائج العملية من ناحية الكفاءة و سعة الفجوات ومعدل التنميش. كانت النتائج مشجعة اذ كانت كفاءة الخلية الشمسية الجديدة اكثر من (%11) مقارنة بالخلية السلكونية الاصلية التي كانت 3.34%)).} }