@Article{, title={Experimental Study of Steady-State Tube Expansion by using Conical Mandrel دراسة تجريبية لعملية التوسيع المستقر للأنابيب باستخدام قوالب مخروطية}, author={Tahseen Taha Othman تحسين طه عثمان and Hazim Khalil Khalaf حازم خليل خلف and Jalal Khorshed Alyan جلال خورشيد}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={33}, number={7 Part (A) Engineering}, pages={148-166}, year={2015}, abstract={An Experimental study Conducted for the continuous expansion process of the brass (70/30) tubes by pushing a conical rigid mandrel inside the tube mechanically.This study included an empirical part throughout the test of (60) tube samples to give a different expanding ratios up to (40%) and almost at semi-cone angle of the mandrel ranging from small, medium and large angles (10°,20° and 30°) in addition to that the samples with different relative thicknesses (0.05, 0.1, 0.15 and 0.2).The theoretical part ensures that for the predicted with relative forming stress that needed to complete the expansion process in addition to the changes in the stresses of the various exposed a wall of the sample tube ,The study included the influence of work hardening property which earns this study has a great importance in how to deal with this property. This study showed a good agreement between both theoretical and practical parts, especially in determining the relative forming stress necessary for the success of the operation that showed the relative forming stress increases as the expansion ratio and the semi-cone angle of the mandrel increases has ranged between (0.1-0.7) of the samples tested. Noting that the formation is influenced by the first was much larger than the second was. Whereas the relative forming stress decrease as the relative thickness increase for the same expansion ratio and the semi-cone angle of the mandrel formation.

أجريت دراسة تجريبية لعملية توسيع الأنابيب المستقرة وذلك من خلال دفع قالب تشكيل فولاذي مخروطي الشكل بداخل أنابيب من البراص(70/30) ميكانيكيا. وتضمنت الدراسة جانباً عملياً من خلال اختبار (60) عينة أنبوبية لتعطي نسب توسيع مختلفة تصل إلى (40%) تقريباً، وبزوايا نصفية لقوالب التشكيل تراوحت ما بين زوايا صغيرة ومتوسطة وكبيرة وهي (30° , 20°, 10°) علاوة على كون العينات ذات أربعة اسماك نسبية مختلفة هي (0.2 , 0.15 , 0.1 , 0.05) كما وتضمن الدراسة جانبا نظريا استند على كون الأنابيب ذات جدران سميكة للتنبؤ بعلاقة الإجهاد التشكيل النسبي مع نسبة التوسيع ، وتضمنت الدراسة تأثير خاصية الأصلاد الانفعالي الأمر الذي يكسب هذه الدراسة أهمية في كيفية التعامل مع هذه الخاصية. أثبتت الدراسة توافقاً جيداً بين الجانبين النظري والعملي وخصوصا في تحديد إجهاد التشكيل النسبي مع نسبة التوسيع، وبينت الدراسة أن إجهاد التشكيل النسبي يزداد كلما زادت نسبة التوسيع والزاوية النصفية لقوالب التشكيل وقد تراوح بين (0.7-0.1) للعينات ألمختبره علماً إن تأثره بنسبة التوسيع كان أكبر بكثير من تأثره بالزاوية النصفية بينما قل إجهاد التشكيل كلما زاد السمك النسبي لنفس نسبة التوسيع والزاوية النصفية لقلب التشكيل.} }