TY - JOUR ID - TI - EFFECT OF RC AND SBR AS COATING CURING MATERIALS ON PROPERTIES OF HIGHWAY RIGID CONCRETE PAVEMENT تاثير RC و SBR كمواد تغطية انضاج على خواص خرسانة بلطات الطرق الجاسئة AU - Shakir Al-Busaltan شاكر البو سلطان AU - Ma'aly Al-Ani معالي العاني AU - Ola Al-Jawad علا الجواد PY - 2016 VL - 9 IS - 1 SP - 47 EP - 58 JO - Al-Qadisiyah Journal for Engineering Sciences مجلة القادسية للعلوم الهندسية SN - 19984456 24117773 AB - The surface to volume ratio of concrete pavement is large, also, due to hot climate of Iraq, coating concrete pavement after casting is essential to ensure vital curing, consequently to obtain significant engineering properties. This research work reports the results of a study performed to evaluate the engineering properties of concrete coated with concrete surface coatings solutions; two types of coating were used representing co-polymer (Styrene-Butadiene Rubber, SBR) and by-product material (Residue Crude, RC). Different coating solutions were prepared from these solutions, individually and collectively; i.e. 100% SBR, 75% SBR+25% RC, 50% SBR+50% RC, 25%SBR+ 75%RC, and 100%RC. The engineering properties of the uncoated and coated concrete samples were evaluated by assessing compressive strength, flexure strength and hardness for concrete convenience for highway rigid pavement. The compressive strength was evaluated for the specimens at 7, 14, 28 and 90 days, where flexure and hardness were evaluated at 28days. The results showed that the coated samples with both SBR and RC performed noticeably better in contrast with uncoated samples under air-dry conditions. Additionally, obvious differences in the performance of the collective solutions were recognized. From the results, however, local by-product materials have been proven as a significant coating materials suitable to enhance the concrete used for pavement purposes.

من الملاحظ ان نسبة السطح الى الحجم في الخرسانة المستخدمة للطرق عالية, كذلك بسبب الجو الحار في العراق, يكون تغطية الخرسانة بعد عملية الصب مهمة لضمان انضاج فعال, و بالتالي الحصول على خواص هندسية عالية. يقر هذا البحث نتائج دراسة تقيم خرسانة مغطاة سطحيا بمحاليل. وهذا المحاليل هي مادة الستارين بيوتدين ستارين SBR ( مادة بولمراتية), ومادة ناتج عرضي من الصناعة النفطية هي رواسب الخام RC. عدة محاليل تغطية تم تحضيرها من هذين المحلولين بشكل مفرد او بخليط منهما: 100% SBR, 75% SBR+25% RC, 50% SBR+50% RC, 25%SBR+ 75%RC, 100%RC. تم تقيم الخواص الهندسية لنماذج الخرسانة المغطاة و غير المغطاة بمقاومة الانضغاط, مقاومة الكسر و الصلابة وبالطبع وفق متطلبات الخرسانة المستخدمة للبلاطات الجاسئة . وتم تقيم النماذج لمقاومة الانضغاط باعمار 7,14, 28, 90 يوم, بينما نماذج مقاومة الكسر و الصلابة باعمار 28 يوم.وبينت النتائج زيادة ملحوظة في اداء الخرسانة المغطاة بال RC و SBR بالمقارنة مع الخرسانة المتروكة بدون تغطية تحت تأثير حرارة الجو. كما ان هناك فروقات ملحوظة ايضا في نتائج الاداء حسب نوع المحلول المستخدم. وكنتيجة ملموسة تم اثبات فعالية مادة ناتجة عرضيا من الصناعة المحلية في تحسين اداء الخرسانة المستخدمة في البلاطات الجاسئة كمادة تغطية للانضاج. ER -