TY - JOUR ID - TI - Strengthening of Zirconia by Glassy Phase AU - Marwa Merza Salman PY - 2016 VL - 24 IS - 1 SP - 245 EP - 251 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - The ceramic industry has been concentrating on the reduction of energy usage during manufacturing because of serious global environmental problems and cost. In this research, we have investigated low-energy processing techniques for ceramic components. The samples were prepared by mixing zirconia with glass (soda lime glass) in different percentages by using powder technology. The samples sintered at 1100 ºC. The following mechanical properties (compressive strength and hardness) and physical properties (density and porosity) were calculated for all samples. The results show the increasing of compressive strength, hardness and density with the increasing of added percentage of glass to the samples. Also it shows the decreasing of porosity with increasing of added percentage of glass to the samples. This study shows the ability of sintering ceramic powders have high melting point, by mixing it with ceramic powders have low melting point, by gathering from the liquid phase (glassy phase) which interpenetrate between the grains of the ceramic material that cause to increase the bonding and strengthening of the samples.

تركز صناعة السيراميك على تقليل استعمال الطاقة خلال عمليات التصنيع بسبب المشاكل البيئية والكلفة. وفي هذا البحث نتحقق من تقنية تصنيع للأجزاء السيراميكية باقل طاقة. تم هذا البحث باستخدام تكنولوجيا المساحيق لإنتاج نماذج سيراميكية من خلط مادتي الزركونيا والزجاج (soda lime glass) وبنسب وزنيه مختلفة للزجاج. لبدت النماذج عند درجة حرارة C)º 1100). وتم قياس الخواص الميكانيكية وتشمل (مقاومة الانضغاط والصلادة) والخواص الفيزياوية وتشمل (الكثافة والمسامية) لجميع النماذج المحضرة. وقد اظهرت النتائج زيادة كل من مقاومة الانضغاط, الصلادة والكثافة مع زيادة النسبة المئوية للزجاج في النماذج, ونقصان المسامية مع زيادة النسبة المئوية للزجاج في النماذج. يبين هذا البحث امكانية تلبيد مساحيق سيراميكية ذات درجات انصهار عالية ( بخلطها بمواد سيراميكية ذات درجة انصهار واطئة بالاستفادة من الطور السائل ( الزجاجي) الذي يتغلغل بين حبيبات المادة السيراميكية مساعدا" على تقويتها وزيادة تماسكها ER -