TY - JOUR ID - TI - Experimental and Numerical Investigation on Shear Transfer of Concrete Specimens Strengthened with CFRP Sheets under Tensile Forces التحقيقات التجريبية والعددية لعينات الخرسانة المسلحة المقواة بألياف الكاربون تحت قوى الشد AU - Abdullkader I. Al-Hadithi عبد القادر إسماعيل عبدالوهاب الحديثي AU - Akram S. Mahmood أكرم شاكر محمود AU - Yasmin S. Abdul-Hameed ياسمين سعد عبد الحميد PY - 2016 VL - 19 IS - 1 SP - 10 EP - 26 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - This study presents experimental and numerical investigations that concern the behavior of pull-off for normal and high strength concrete specimens strengthened with various configurations of carbon fiber reinforced polymer (CFRP) sheets. Three parameters have been investigated; the first is the strength of concrete by casting half of samples as normal strength concrete and the other as high strength concrete. The second parameter is the ratio of reinforcement crossing the shear plane. The third parameter is the CFRP strengthened. Three dimensional finite elements tools with eight-node elements are used to represent concrete, whereas embedded bar element type is used to represent the reinforcement. Nonlinear behavior of concrete in compression, tension and the reduction of the shear modulus due to cracking are be taken into account.A finite element which was used to represent concrete is three dimensional with eight nodes elements and embedded bar elements to represent the reinforcement. Nonlinear behavior of concrete in compression, tension and the reduction of the shear modulus due to cracking are be taken into account.

يتضمن هذه البحث دراسة عملية و نظرية لسلوك نماذج للخرسانة المسلحة المعتدلة والعالية المقاومة والمقواة بطرق مختلفة بشرائح ألياف الكاربون. تمت دراسة المتغيرات الآتية: المتغير الأول هو مقاومة الخرسانة وذلك بصب نصف النماذج كخرسانة معتدلة المقاومة والنصف الآخر بخرسانة عالية المقاومة ، أما المتغير الثاني هو حديد التسليح في منطقة القص، فيما كان المتغير الثالث هو التقوية بألياف الكاربون.استخدمت طريقة العناصر المحددة لتمثيل النماذج الخرسانية، حيث استخدم موديل ثلاثي الأبعاد بثماني عقد وتم تمثيل قضبان الحديد المطمور في جسم الخرسانة ، مع الأخذ بنظر الاعتبار التصرف الغير خطي للخرسانة بالانضغاط والشد والتقليل في معامل القص الناتج عن التشقق. نفس المتغيرات التي تم دراستها في البرنامج العملي طبقت في البرنامج النظري. ER -