TY - JOUR ID - TI - Behavior of Reinforced Lightweight Concrete Two Way Slabs Strengthened With CFRP Sheets سلوك البلاطات الخرسانيةالخفيفة الوزن المسلحة و المقواة بصفائح البوليمر المسلح بالألياف الكاربونية AU - Mazen D.Abdulah PY - 2015 VL - 33 IS - 8 Part (A) Engineering SP - 1813 EP - 1829 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - The principal objective of this paper is to investigation experimental and theoretical of flexural behavior of reinforced light weightconcrete two-way slabs strengthened or repaired with externally bonded carbon fiber reinforced polymer (CFRP) sheets. The experimental work includes testing of eight reinforced concrete slab specimens with dimensions (1050mmx1050mmx600mm), five of these slabs were strengthened, three slabs were repaired with carbon fiber reinforced polymer (CFRP) strips and one specimen was tested without strengthening acts as reference slab (control) for comparing the performance of CFRP strengthened or repaired slabs. The experimental variables considered in the test program include the quantity and shape of CFRP sheets. All the reinforced concrete slab specimens were designed of the same dimensions and reinforced identically to fail in flexure. All slabs had been tested in simply supported conditions subjected to central concentrated load.The experimental results show that the ultimate loads are increased by about (7-45%) for the slabs strengthened with bonded CFRP sheets with respect to the unstrengthened reinforced concrete slab (control slab). Three-dimensional nonlinear finite element analysis has been used to conduct the numerical investigation of the general behavior of strengthened slabs. ANSYS (Version 13.0) computer software was used in this work.Eight-node brick elements (SOLID65) are used to represent the concrete and three dimensional shell elements (SHELL 41) are used to represent the CFRP strips in the finite element analysis model. Perfect bond between the concrete surface and the bonded CFRP sheets is assumed.

ان الغرض من هذا البحث هو تقديم دراسة عملية و نظرية لسلوك الانحناء للبلاطات الخرسانية المسلحة ذات الاتجاهينوالمقواة او المعاد تصليحها بالبوليمر المدعم بالياف الكاربون (CFRP).يتضمن الجزء العملي من هذا البحث فحص ثمانية نماذج لبلاطات خرسانية مسلحة مختبرياً بابعاد (1050ملم طول، 1050ملم عرض، 600 ملم ارتفاع البلاطة ) بالاضافة الى سلسلة من الفحوصات على المواد الانشائية المستخدمة.خمسة من هذه البلاطات الخرسانية المسلحة تم تقويتها وثلاثة من هذه البلاطات تم اعادة تصليحها باستخدام اشرطة الياف الكاربون البوليميرية (CFRP) وبلاطة خرسانية مسلحة واحدة تم فحصها بدون أي تقوية واعتبرت كنموذج اساس لغرض المقارنة مع النماذج المقواة او المعاد تصليحها. ان المتغيرات الاساسية التي جرى أعتمادها في الجانب العملي هي كمية و شكل اشرطة الياف الكاربون البوليمرية المستخدمة في تقوية او تصليح هذه البلاطات.صممت جميع البلاطات الخرسانية المستخدمة في هذا البحث بنفس الابعاد وتم تسليحها بشكل يضمن فشلها بالانحناء، تم فحص جميع البلاطات في فضاء بسيط الاسناد وبتسليط حمل مركز في منتصف هذه البلاطات.أظهرت النتائج العملية التي تم الحصول عليها من النتائج المختبرية أن عملية تقوية البلاطات الخرسانية باستخدام الياف الكاربون البوليمرية ادت الى زيادة في قيمة التحمل الاقصى للانحناء للبلاطات (Ultimate Loads) يصل مقدارها بين (7-45%) مقارنة بالبلاطات الخرسانية غير المقواة باستخدام الياف الكاربون البوليمرية.تم أستعمال التحليل اللاخطي بواسطة العناصر المحددة (Finite Elements) ثلاثية الأبعاد كوسيلة عددية للدراسة والتحري عن سلوك وتصرف هذه البلاطات باستخدام البرنامج (ANSYS الاصدار الثالث عشر) حيث تم في هذا البرنامج تمثيل الاجزاء الخرسانية باستخدام العناصر الطابوقية ذات الثمانية عقد (Solid 65) بينما تم استخدام العناصر القشرية ثلاثية الابعاد (3D Shell 41) لتمثيل شرائط الياف الكاربون البوليمرية وتم إفتراض وجود ربط تام بين شرائط الياف الكاربون البوليميرية و سطح تماس البلاطة الخرسانية. ER -