TY - JOUR ID - TI - Effect of additive of CuO and annealing on the Morphological and Electrical Properties of TiO2 by pulse laser deposition تأثير التراكيز و التلدين على دراسة طبوغرافية السطح و الخواص الكهربائية لأغشية التيتانيوم المطعمة بأوكسيد النحاس النانوية ذات التركيب النانوية المحضرة بتقنية ترسيب الليزر النبضي PLD AU - Sabah N. Mazhir AU - Ghosoun Hamid Ahmed AU - Noha. H. Harb AU - A.Abdallah.A PY - 2015 VL - 33 IS - 5 Part (B) Scientific SP - 895 EP - 907 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In this paper, Nano crystalline TiO2 and CuO additive TiO2 thin films were successfully deposited on suitably cleaned glass substrate at constant room temperature, and different concentration of CuO (0,5,10,15,20)% wt using pulse laser deposition(PLD) technique at a constant deposition parameter such as : (pulse Nd:YAG laser with λ=1064 nm, constant energy 800 mJ ,with repetition rate 6 Hz and No. of pulse (500).The films were annealed at different annealing temperatures 423K and 523 K. Effect of annealing on the morphological and electrical were studied. Surface morphology of the thin films has been studied by using atomic force microscopes (AFM). AFM measurements confirmed that the films have good crystalline and homogeneous surface. The Root Mean Square (RMS) values of thin films surface roughness are increased with the increase of annealing temperature. Also, The grain size increases with the increasing of concentration of CuO and annealing. The temperature dependence of the electrical conductivity and the activation energy at temperature ranging from (293-473)K of the as-deposited and films annealed at different annealing temperatures have been studied. The results show that as the film concentration of CuO and conductivity increases, while the activation energy(Ea1,Ea2) decreases. Both, the annealing and composition effects on Hall constant, RH, charge carrier concentration (NH), Hall mobility. Hall Effect are studied. Hall Effect measurements show that all films have n- type charge carriers and the concentration and annealing increases carriers concentration while the mobility decreases .

في هذا البحث, رسيب مادة TiO2 )) المطعمة بمادة (CuO) على ارضيات زجاجية منظفة بشكل مناسب بدرجة حرارة الغرفة وبتراكيز مختلفة من مادة CuO (0,0.5,0.1,0.15,0.2) wt% بطريقة تقنية ترسيب الليزر النبضي (PLD) باستخدام ليزر النيدميوم ياك النبضي بمعلمات ترسيب ثابته وهي الطول الموجي 1064nm عند طاقة ثابتة 800m ,معدل تكرار6Hz وكان عدد النبضات المستخدمة (500) وقد لدنت بدرجات حرارة مختلفة423K , 523) K).تم استقصاء تأثير التلدين على طبوغرافية السطح و الخصائص الكهربائية. تم دراسة طبوغرافية السطح باستخدام مجھر القوى الذرية (AFM). اكدت مقاييسَ (AFM) بأنّ الأفلامَ لَها سطحُ بلّوريُ متجانسُ جيدُ وان قيم (RMS) للأغشية الرقيقة والخشونة تزداد بزيادةِ درجةِ حرارة. وأيضاً زيادة حجمَ الحبوبَ بزيَاْدَة تركيزِ CuO والتلدين. كما درست تأثير درجة الحرارة للأفلام المترسبة بدرجات حرارة مختلفة على التوصيلِ الكهربائيِ وطاقةِ التنشيطَ والتي كان مداها k(293-473).وكانت النتيجة زيادة التوصيلية الكهربائية وقلت طاقة التنشيط مع زيادة تراكيز مادةCuo ودرجات الحرارة .و درست تأثيرات التركيبَ والتَلْدين على ثابت هول ، RH ،تركيز ناقلات الشحنة (NH) و التحركية . وقد تبين كُلّ الأفلام لها حاملات شحنة من النوع السالب n وبزيادة التركيز و التلدينات تزداد حاملات الشحنة بينما تَنْقصُ قابليةَ الحركة. ER -