TY - JOUR ID - TI - PREDICTION THE THICKNESS LAYER OF GALVANIZED IRAQI ELECTRICAL POLES USING MATHEMATICAL MODEL تخمين سمك طبقة الغلونة للاعمدة الكهربائية العراقية باستخدام موديل رياضي AU - PY - 2015 VL - 8 IS - 4 SP - 713 EP - 721 JO - DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية SN - 19998716 26166909 AB - Galvanized steel has a long history as an effective and economical material for manufacturing electrical poles. Galvanized steel consists of a thin coating of zinc fused to a steel substrate. This combination provides the pole high mechanical properties as the mechanical properties of steel enhanced with the corrosion resistance of zinc.Corrosion rates have been calculated by Tafel extrapolation technique for different coating thicknesses (80, 90,100,110,120 and 130) µm. The soil resistivity is simulated by different concentrations (2, 2.5, 3, & 3.5) wt. % NaCl. Optical microscope examinations for their specimens were used successfully to evaluate corrosion rates for the galvanized steel poles.Regression model has been used in this work to find the correlation between the corrosion parameters representing by thickness of galvanized layer of low carbon steel and resistivity of soil. Matlab (R 2013A) programme was used to get the unknown cofficients of the regression model . Theoretical mathematical equations were performed to predict the thickness layer of galvanized Iraqi electrical poles to get the best thickness of galvanized layer which has high corrosion resistance in different soil resistivity. This is considered the aim of this work. The results of the mathematical model show that the corrosion rate of galvanized steel decreases with the increase in coating thickness from 80 - 120 µm. The best corrosion resistance occurs at thickness 120 µm galvanized layer, while at 130 µm thickness micro cracks appear in the coating layer. The coating thickness has a direct influence on the performance or life of the electrical poles. As the thickness of galvanized layer increases, the life of protection increases until 120 µm.

يمتلك الفولاذ المغلون تاريخ طويل في استخدامه كمادة فعاله وا قتصادية في تصنيع الاعمدة الكهربائية. يتكون الفولاذ المغلون من طبقة خفيفة من الخارصين تغطي الفولاذ . لان هذا المزيج المعدني يعطي خواص ميكانيكية عالية يمتاز بها الفولاذ وخواص حماية من التأكل تعطيها طبقة الخارصين. تم حساب معدلات التاكل بطريقة استكمال منحني تافل ولسمك طبقة غلونة مختلف من 80 , 90 , 100, 110, 120 و 130 مايكرومتر . لقد تم تمثيل مقاومة التربة باستخدام تراكيز مختلفة من محلول كلوريد الصوديوم ( 2, 2,5 , 3 و 3,5) نسبة وزنية من كلوريد الصوديوم. تم الفحص بالمجهر الضوئي لسطوح العينات لغرض تقييم معدلات التاكل. لقد انجز موديل رياضي لتخمين سمك طبقة الغلونة لاعمدة كهربائية عراقية مغلونة لغرض الحصول على افضل سمك لطبقة الغلونة والتي تعطي افضل مقاومة تاكل في مختلف الاترب العراقية، وقد تم استخدام نموذج الانحدار في هذا العمل لإيجاد العلاقة بين معلمات التآكل المتمثله بسمك الطبقة المغلونه من الصلب منخفض الكربون و المقاومة النوعية للتربة. تم استخدام برنامج ماتلاب. للحصول على المعاملات من نموذج الانحدار. وأجريت المعادلات الرياضية النظرية على التنبؤ بسمك طبقة أعمدة الكهرباء العراقية المغلونه للحصول على أفضل سمك طبقة مغلون والتي لديها مقاومة للتآكل عالية في مقاومة التربة المختلفة والذي يمثل هدف البحث الحالي. لقد بينت نتائج الموديل الرياضي ان معدل التاكل للفولاذ المغلون تنخفض مع زيادة سمك طبقة الغلونة من 80-120 مايكروميتر . ان افضل مقاومة تاكل حصل عليها كان عند سمك طبقة غلونة 120 مايكروميتر بينما لوحظ ظهور شقوق مجهرية عند سمك 130 مايكروميتر. يؤثر سمك طبقة الغلونة بشكل مباشر على اداء وعمر الاعمدة الكهربائية وبشكل عام كلما زاد سمك طبقة الغلونة يزداد عمر العمود الكهربائي ولغاية سمك 120 مايكروميتر. ER -