@Article{, title={Seismic Effects and Static Analysis for the Artificial Damped Outrigger Systems in Tall R.C Buildings التأثيرات الزلزالية والتحليل الأستاتيكي لأنظمة دعامة الإخماد الاصطناعي في المباني الخرسانية المسلحة العالية}, author={Abbas A. Allawi عباس عبد المجيد علاوي and Amneh Hamid Al Mukhtar آمنة حامد المختار}, journal={Journal of Engineering مجلة الهندسة}, volume={22}, number={6}, pages={32-50}, year={2016}, abstract={This paper studies the combination fluid viscous dampers in the outrigger system to add supplementary damping into the structure, which purpose to remove the dependability of the structure to lower variable intrinsic damping. It works by connecting the central core, comprising either shear walls or braced frames, to the outer perimeter columns. The modal considered is a 36 storey square high rise reinforced concrete building. By constructing a discrete lumped mass model, and using frequency-based response function, two systems of dampers, parallel and series systems are studied. The maximum lateral load at the top of the building is calculated, and this load will be applied at every floor of the building, giving a conservative solution. For static study Equivalent Lateral Force (ELF) was conducted. MATLAB software, has been used in this study. From analysis data, it is observed that the parallel system of dampers result lower amplitude of vibration and achieved more efficiently compared to the series system, and the horizontal displacement for each configurations by using MATLAB software is less than the analytical solution using a uniformly distributed load of 36 nodal point forces that divided the total height.

تتناول هذه الدراسة عملية دمج مخمدات السائل اللزج في نظام الدعامة لإضافة إخماد تكميلي للمنشأ ، والذي يهدف إلى إزالة اعتماد المنشأ على القيمة المنخفضة للإخماد الجوهري. وهي تعمل عن طريق ربط النواة المركزية (the central core )، التي تضم إما جدران القص أو هيكل مدعوم، إلى الأعمدة الخارجية المحيطة. النموذج الذي تم دراسته هو بناية شاهقة الارتفاع من الخرسانة المسلحة تتكون من 36 طابق وذات مقطع مربع. تتمحور الدراسة من خلال انشاء نموذج من كتل متجمعة منفصلة, واستعمال دالة الاستجابة المعتمدة على التردد, لنظامين من المخمدات، وهما نظاما التوازي والتوالي. تم احتساب الحد الأقصى للحمل الجانبي في الجزء العلوي من المبنى، وطبق هذا الحمل لكل طابق من المبنى، معطيا حلا محافظا. تم استعمال طريقة القوة الجانبية المكافئة للحالة الاستاتيكية. تم استخدام برنامج MATLAB في هذه الدراسة. لوحظ من تحليل البيانات أن المخمد السائل اللزج بوضعية التوازي ينتج ذبذبات ذات قيم اقل ويحقق كفاءة أكثر مقارنة بوضع المخمد بوضعية التوالي. باستعمال برنامج MATLAB تكون الإزاحات الأفقية لكلا النظامين أقل من طريقة التحليل باستعمال حمل يوزع بشكل منتظم على 36 نقطة عقدية مقسومة على الارتفاع الكلي.} }