@Article{, title={Electrical Insulation Breakdown Strength and Thermal Conductivity of Different Blended Nanocomposites of New Epoxy Resins قوة انهيار العزل الكهربائي والتوصيل الحراري لمختلف السبائك النانوية المتراكبة لراتنج الايبوكسي الجديد}, author={Basma J. Ahmed بسمة جعفر احمد and Fadhel S. Matty فاضل سليم متي and Jumbad H. Tomma جمبد هرمز توما}, journal={Ibn Al-Haitham Journal For Pure and Applied Sciences مجلة ابن الهيثم للعلوم الصرفة والتطبيقية}, volume={29}, number={1}, pages={166-180}, year={2016}, abstract={This research studies the development and synthesis of blended nanocomposites filled with Titanium dioxide (TiO2). Blended nanocomposites based on unsaturated polyester resin (UPR) and epoxy resins were synthesized by reactive blending. The optimum quantity from nano partical of titanium dioxide was selected and different weight proportions 1%, 3%, 5%, and 7% ratios of new epoxy are blended with UPR resin. The dielectric breakdown strength and thermal conductivity properties of the blended nanocomposites were compared with those of the basis material (UPR and 3% TiO2).The results show good compatibility epoxy resins with the UPR resin on blending, dielectric breakdown strength values are higher while thermal conductivity values of blends nanocomposites are significantly lower compared to that of the(UPR and 3% TiO2), semi-interpenetrating UPR/Epoxy blends (semi-IPNs) for one type of new epoxy [P2]was prepared and noticed the blend nanocomposites show higher dielectric breakdown strength than the semi- IPNs (UPR/Epoxy) at low loading of new epoxies but the thermal conductivity is a higher than the semi- IPNs UPR/Epoxy at all loading. Thermogravimetric analysis (TGA) was employed to study the thermal properties of the blended nanocomposites.

يكشف هذا البحث عن تحضيروتطوير عشرة مخاليط متراكبة ومليئة بجسيمات نانويه وهي ثاني أوكسيد التيتانيوم (TiO2). تم تحضير شبكات البوليمر المتراكبة النانويه على أساس راتنج البوليستر غير المشبعة (UPR) وراتنجات ايبوكسي جديدة مختلفه عن طريق مزج فعال .أذ تم اختيار النسبه المثلى من الجسيمات النانويه لثاني أوكسيد التيتانيوم (3%) وهي نسبة مختارة من نتائج مزجها بنسب مختلفة مع راتنج البولي استر غير مشبع. ومن ثم مزجت النسبة المثلى (3%) من(TiO2) مع بولي استرالغير مشبع مع نسب مختلفه من مركبات الايبوكسي الجديدة 1 ٪ , 3٪ , 5٪ و 7٪ من وزن راتنج البولي استر غير مشبع. وتمت مقارنة خصائص قوة انهيار العزل الكهربائي والتوصيل الحراري للمتراكبات النانويه المقساة مع تلك المواد الأساس (UPR و 3٪ TiO2). تظهر الاولى قوة انهيار العزل الكهربائي اعلى في حين التوصيل الحراري هي اقل وكما تم تحضيرمخاليط لاحد تراكيب الايبوكسي رقم ( 2) وبالنسب المذكورة نفسها (UPR و (Epoxy و مقارنتها مع مخلوط المتراكبة النانويه لوحظه ان قوة انهيار العزل الكهربائي للمخلوط المتراكبة النانويه هو الاعلى عند نسب التحميل الواطئة للإيبوكسي رزن وكما اظهرت التوصيلية الحرارية عالية مقارنة بما اظهرته مخاليط من ( UPR Epoxy/) .اجري التحليل الحراري الوزني (TGA) لدراسة الخواص الحرارية للمخاليط المتراكبة النانويه .} }