@Article{, title={The Effect of Ferrite Content on the Thermomechanical and Dielectric Strength Properties of Epoxy Composite تأثير التقوية بالفرايت على الخواص الحرارية و الميكانيكية ومقاومة العزل لمتراكبات الايبوكسي}, author={Zahraa F. Attiyah and Lamees S. Faiq}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={34}, number={1 Part (A) Engineering}, pages={186-192}, year={2016}, abstract={Different concentrations of cadmium ferrite (2%, 5%, 8%, 10% and 15%) were incorporated into epoxy resin. Cadmium ferrite was prepared by conventional ceramic technique. Composites are prepared by mixing the ferrite with epoxy by hand lay - up method at different percentages. The effect of ferrite content on tensile strength, hardness, thermal properties such thermal conductivity, thermal diffusivity and specific heat beside the dielectric strength were investigated. Using ferrite powders as filler to form particulate composite could lead to composite properties improvement. All the measured properties were improved with the increasing of the filler content. The results showed the important role of perfect adhesion between the filler and the polymer on the composite properties. It is found that the uniform distribution of filler particles in all directions of composite leads to the improved properties.

تراكيز مختلفة من الكادميوم فرايت (2%, 5%, 8%, 10%, 15%) ادرجت في راتنج الايبوكسي. الكادميوم فرايت اعد بتقنية السيراميك التقليدية . المتراكبات تم تحضيرها عن طريق خلط الفرايت مع الايبوكسي بالطريقة اليدوية وبنسب مختلفة . تم دراسة تأثير محتوى الفرايت على خواص الشد والصلادة والخواص الحرارية مثل التوصيلية الحرارية , الانتشلر الحراري , الحرارة النوعية بالاضافة الى مقاومة العزل. استخدام مساحيق الفرايت كتقوية لتكوين المتراكبات ادى الى تحسين خواص هذه المتراكبات . جميع الخواص التي تم قياسها تحسنت مع زيادة محتوى التقوية. اظهرت النتائج الدور المهم للالتصاق ما بين التقوية والبوليمر على خواص المتراكب. وقد وجد ان التوزيع المنتظم لدقائق الحشوة في جميع اتجاهات المتراكب يؤدي الى تحسين الخواص .} }