@Article{, title={SUITABILITY OF MIOCENE CLAYS IN SELECTED LOCATIONS OF SALAH AL-DIN GOVERNORATE IN THE MANUFACTURING OF LIGHTWEIGHT AGGREGATE ملائمة أطيان المايوسين من مواقع مختارة في محافظة صلاح الدين في تصنيع ركام خفيف الوزن}, author={Qutaiba F. Abd-Alqader قتيبة فاضل عبد القادر and Sawsan H. Al-Hazaa سوسن حميد الهزاع}, journal={Iraqi Bulletin of Geology and Mining مجلة الجيولوجيا والتعدين العراقية}, volume={12}, number={2}, pages={11-20}, year={2016}, abstract={Sampling sites, were selected from Injana and Fatha Formations. The two studied areas are located within the province of Salah Al-Din. The first one is of Fatha Formation clays in Nukhaila area (N) in the Himrin anticline which lies about 40 Km the south of Tikrit city. The second is located within the southeast of the Khanoqa plunging anticline where Injana clays are well exposed.The results of chemical analysis showed that the studied samples consist of SiO2, Al2O3, Fe2O3, CaO, MgO, TiO2 and SO3 as well as losses on ignition (L.O.I). The physical properties of the studied samples revealed that these are of sandy clayey type and muddy clayey type and characterized by their medium plasticity and can be formed easily.Dough is made from the studied clay samples after grinding it to size 1.00 and 0.77 mm. then adding 15 – 18% of water and spheres are made manually to about 18 – 20 mm size.The chemical analysis showed that the studied samples do not fall within the limits of swelling type therefore, mixtures are made from these clays by adding to them 7% sawdust, 2% of waste motors oil and fluxing materials such as Na-bicarbonates (NaHCO3) and spheres are made manually with the same size as above.The evaluation test results are related to density, water absorption and apparent porosity of the firing and match global studies on light weight aggregate revealing the suitability of Fatha clays of Nukhaila area (N) for manufacturing light weight aggregate after adding 7% sawdust and 2% Na-bicarbonate. The clays of Injana Formation (K) in Khanuqa area, however, has failed and showed no conformity with international results, especially regarding density.

يقع موقعي الدراسة ضمن حدود محافظة صلاح الدين متمثلة بموقعين الأول لتكوين الفتحة في منطقة (النخيلة) ((N والموقع الثاني لتكوين إنجانة الذي يقع ضمن منطقة الغاطس الجنوبي الشرقي من طيه خانوگة ((K المحدبة.بينت نتائج التحليل الكيميائي لعينات الدراسة لكلا الموقعين بأنها تتكون من الأكاسيد الرئيسية التالية: (SO3، Na2O، TiO2، CaO، MgO، Fe2O3 و SiO2) فضلا عن مفقودات الحرق (L.O.I) وتشكل السليكا النسبة الرئيسة لهذه النماذج لكلا الموقعين. تم عمل عجينة من هذه الأطيان لكلا الموقعين بعد طحنها على الحجمين (1.00 ملم و0.075 ملم) حيث تم إضافة الماء بنسبة (15 – 18 %) إلى النموذجين وتم تصنيع الحصى بطريق يدوية بأحجام (18 – 20 ملم).بينت النتائج التحليل الكيميائي بأنها لا تقع ضمن حدود الأنتفاخ لذا تم عمل خلطات أخرى بإضافة مواد أخرى متمثلة بنشارة الخشب بنسبة 7% وزيت المحركات المستهلك بنسبة 2% ومواد مصهرة بيكاربونات الصوديوم (بيكن باودر NaHCO3) بإضافة نفس نسبة الماء وعمل الحصى بنفس الحجم أعلاه.تم مطابقة نتائج الفحوصات التقويمية (الفيزيائية): الكثافة، إمتصاص الماء، المسامية الظاهرية لعينات الركام الخفيف مع بحوث عالمية ومحلية عن ركام خفيف الوزن وتبين أن نماذج تكوين الفتحة/ موقع النخيلة (N) ملائمة لصناعة الركام الخفيف بعد إضافة نشارة الخشب بنسبة 7% وبيكاربونات الصوديوم بنسبة 2%. أما بالنسبة لنماذج تكوين إنجانة/ موقع خانوگة (K) فتبين أنها فاشلة لكونها لاتتطابق من الناحية الفيزيائية مع نتائج البحوث والدراسات العالمية والمحلية.} }