TY - JOUR ID - TI - Corrosion, Passivity and Pitting of Inconel (600) in Sulphuric Acid تاكل، سلبية و نقر سبيكة الانكونيل (600) في حامض الكبريتيك AU - Taghried A. Salman تغريد علي سلمان AU - Samar T. Hameed سمر ثامر حميد PY - 2016 VL - 13 IS - 2ملحق ابحاث المؤتمر الوطني الثاني للكيمياء SP - 40 EP - 47 JO - Baghdad Science Journal مجلة بغداد للعلوم SN - 20788665 24117986 AB - A potentiostatic study of the behaviour of Inconel (600) in molar sulphuric acid has been carried out over the temperature range 293-313 K. Values have been established for the potentials and current densities of the corrosion, active-passive transition, passivity and transpassive states. For corrosion, the current density (ic) and potential (Ec) have been determined from well-defined Tafel lines. The potential and current density prior to the commencement of passivity have been obtained corresponding respectively to the critical potential (Ecr( and to the current density (icr) for the active-passive transition state. The passive range was defined by the respective potentials and current densities for passive film formation and dissolution. The dissolution point was correlated with transpassive potential (Et) and current density (it). All the estimated potentials and current densities for the various states were influenced by temperature and the presence of additives in the sulphuric acid. Additives such as nitric acid, thiourea and sodium chloride lowered the corrosion current density (ic) of the alloy while hydrochloric acid enhanced the value of ic. Addition of thiourea or sodium chloride or hydrochloric acid caused a shift in the corrosion potential (Ec) to less negative values while nitric acid shifted Ec to more negative potentials. The kinetic effect of the additives have been studies. Values of activation energy (E) were considered to be apparent and some negative values of E have been obtained with certain additives for the critical and passivity processes. Such negative E values were attributed to small values of true energies of activation together with relatively large exothermic enthalpies of such processes.

أجريت دراسة مجهادية سكونية لسلوك سبيكة الانكونيل (600) في محلول حامض الكبريتيك المولاري على مدى درجات الحرارة من 293 إلى 313 كلفن. أمكن الحصول على قيم جهود وكثافات تيار التآكل ولحالة الانتقال من الإيجابية الى السلبية ولحالة السلبية وما بعد السلبية. أمكن إيجاد جهد التآكل (Ec) وكثافة تيار التآكل (ic) من تقاطعات خطوط تافل. تم إيجاد الجهد الحرج (Ecr) وكثافة التيار الحرج (icr) للتحول من الحالة الإيجابية إلى السلبية. وأمكن تحديد مدى السلبية بدلالة جهود وكثافات تيار تكوين وذوبان طبقة السلبية. نقطة ذوبان طبقة السلبية قد تم ربطها بجهد (Et) وكثافة تيار (it) نقطة ما بعد السلبية. إن جميع قيم الجهود وكثافات التيار كانت تتأثر بدرجة الحرارة وبوجود المضافات في وسط التآكل. فالمضافات مثل حامض النتريك والثايويوريا وكلوريد الصوديوم سببت خفضا في قيمة كثافة تيار التآكل (ic) للسبيكة في حين أدت اضافة حامض الهيدروكلوريك إلى وسط التآكل إلى زيادة قيمة ic . أدت إضافة كل من الثايويوريا أو كلوريد الصوديوم أو حامض الهيدروكلوريك إلى إزاحة جهد التاكل (Ec) إلى قيم أقل سالبية في حين أزاحت إضافة حامض النتريك جهد التآكل (Ec) إلى قيم أكثر سالبية. اقتصرت التأثيرات الحركية للمضافات المختلفة على قيمة طاقة تنشيط التآكل. اعتبرت قيم طاقات التثبيط المستحصلة بأنها قيم ظاهرية وكانت بعضها سالبة. ER -