@Article{, title={Preparation and Characterization of Bimetallic Catalyst (NiO – CoO) for Desulfurization of Gas Oil تحضير وتمييز عـامـل مساعـد ثنائـي الـمـعـــدن ( NiO –CoO ) لازالة الـكـبـريــت من زيت الغاز}, author={Jalil R. Ugal جليل رهيف عكال and Asmaa H. Hussein اسماء هادي حسين}, journal={Baghdad Science Journal مجلة بغداد للعلوم}, volume={13}, number={2ملحق ابحاث المؤتمر الوطني الثاني للكيمياء}, pages={75-83}, year={2016}, abstract={In this study NiO - CoO bimetallic catalysts are prepared with two Ni/Co ratios (70:30 and 80: 20) using the precipitation method of nitrate salts. The effects of Ni /Co ratio and preparation methods on the catalyst are analyzed by using different characterization techniques, i.e. atomic absorption (AA) , XRD, surface area and pore volume measurements according to the BET method . The results indicate that the best catalyst is the one containing the percentage of Ni :Co ( 70 : 30 ). Experiments indicate that the optimal conditions to prepare catalyst are stirring for three hours at a temperature of 60oC of the preparation , pH= (8-9) , calcination temperature at 400oC for two hours using the impregnation method . The catalyst activity is studied through the application in the process of oxidative desulfurization of gas oil fuel . The optimal conditions for deep oxidative desulfurization processes are : catalysts 3% , 2 gm. Na2 CO3 , refluxe time 3 hours at 400 C , using a mechanical stirrer at moderate speed (700 rpm), the volume ratio of gas oil : H2O2 : acetic acid is 10: 1: 0.5 and extracted with 1:1 ratio of acetonitrile to the gas oil for three times . The results indicate that the catalysts are efficient to remove sulfur from gas oil depending on temperature, time, concentration of hydrogen peroxide H2O2 30 % and solvent used for extraction. The efficiency of the best catalyst gives a maximum sulfur removal reaching 68.97%.

تم تحضير عوامل مساعدة ثنائية المعدن من نوع NiO – CoO وبنسب مختلفة من الكوبلت والنيكل (30:70 و20:80) بطريقة الترسيب باستخدام نترات المعادن وشخصت العوامل المساعدة المحضرة بواسطة تقنيات الامتصاص الذري (AA) وحيود الاشعة السينية وقياس المساحة السطحية والحجم الحبيبي .اشارت النتائج الى ان أفضل العوامل المساعدة هي التي تحتوي على نسبة النيكل : كوبلت (30: 70)دلت التجارب ان أفضل الظروف لتحضير العامل المساعد هي الترسيب بدرجة حرارة 60 م0 و pH تتراوح بين (9-8 ) ويتم التحميص عند درجة حرارة 400 م0 لمدة ساعتين.استخدمت هـذه العوامل المساعـدة المحضرة فـي عمليات الاكسدة لإزالة الكبريت من زيت الغاز gas oil بوجود بيروكسيد الهيدروجين كعامل مؤكسد و حامض الخليك (co-catalyst ).دلت النتائج على أن العامل المساعـد كان كفوءا في ازالة الكبريت وتعتمد كفاءته على درجة الحرارة , كمية بيروكسيد الهيدروجين وكمية المذيب المستخدم لأغراض الاستخلاص وأن الظروف المثلى لعملية الاكسدة هي : 3% من العامل المساعد و2 غرام من كربونات الصوديوم , واستخدام محرك ميكانيكي سرعته 700 دورة بالدقيقة وبنسب زيت الغاز : بيروكسيد الهيدروجين30% : حامض الخـليك (10: 1: 0, 5) اضافة الى استخدام استيونتريل للاستخلاص بنسبة (1:1) ثلاث مرات وكان زمن التصعيد ثلاث ساعات وبدرجة حرارة 40 م0. ولقد بلغت افضل ازالة للكبريت 68.97% .} }