TY - JOUR ID - TI - Energy and Exergy Analyses of Heat Pump Cycle with Refrigerant Injection Technology تحليل الطاقة وجودتها لمضخة حرارية ذات تقنية حقن مائع التثليج AU - Abdul Hadi N. Khalifa عبدالهادي نعمة خليفة AU - Johain J. Faraj جهين جودت فرج AU - Hayder K. Hasan حيدر كريم حسن PY - 2016 VL - 22 IS - 11 SP - 101 EP - 110 JO - Journal of Engineering مجلة الهندسة SN - 17264073 25203339 AB - The effect of refrigerant injection techniques on the performance of heat pump system based on exergy analysis was studied theoretically. Three refrigerant injection techniques were used; the first was achieved by injected vapour in volume ratios from 1 to 7% in the accumulator. The second was injection liquid refrigerant in the discharge line with the aid of Liquid Pressure Amplification (LPA) pump, with volume ratios from 1 to 10%. The third was a hybrid injection with volume ratios of injected vapour and liquid varied from 1 to 3% and 1 to 10%; respectively. The following improvements in cycle performance were observed. For vapour injection technique, the best ratio of injection was 5%, the exergy destruction reduced by 21% and exergy efficiency enhanced by 14.6%. For liquid injection technique the best ratio of injection was 6%, the reduction in exergy destruction was 34% while the exergy efficiency increased by about 21.4%. The hybrid injection technique increased the exergy efficiency by 23% when the volume ratio of vapour and liquid injections are 3% each. The effect of condensing pressure on the cycle performance was studied also. The optimum exergy efficiency of the cycle was 54.55% achieved when the condensing pressure was 15 bars.

دراسة نظرية لبيان تأثير تقنيات حقن وسيط التبريد على أداء المضخة الحرارية وفقا لتحليل الاكسيرجي. تم أستخدام ثلاث تقنيات لحقن وسيط التبريد، الاولى أنجزت عن طريق حقن البخار بنسبة حجمية من 1 الى 7% داخل مجمع السائل. في الثانية تم حقن سائل وسيط التبريد خلال خط الدفع بأستخدام مضخة تضخيم ضغط السائل مع نسب حجمية من 1 الى 10%. التقنية الثالثة كانت الحقن المزدوج بنسب حجمية للبخار والسائل المحقونين من 1 الى 3% و 1 الى 10% على التعاقب. لوحظت التحسينات التالية في الدورة، لتقنية حقن البخار كانت افضل نسبة للحقن 5%، قلت الاكسيرجي الضائعةالى 21% وتحسن كفاءة الاكسيرجي الى 14.6%. لتقنية حقن السائل كانت افضل نسبة للحقن 6%، قلت الاكسيرجي الضائعة الى 34% بينما تحسنت كفاءة الاكسيرجي الى 21.4%. في تقنية الحقن المزدوج ازدادت كفاءة الاكسيرجي الى 23% عندما كانت النسبة الحجمية للبخار والسائل المحقونين 3% لكل منهما. تمت دراسة تأثير ضغط التكثيف على اداء الدورة ايضاً. أقصى كفاءة اكسيرجي للدورة 54.55% تم الحصول عليها عندما كان ضغط التكثيف 15 بار. ER -