@Article{, title={Study The Molarity Influence on the structural properties of titanium oxide (TiO2) Prepared with (Sol_Gel) دراسة التأثير المولاري على الخصائص التركيبية لأوكسيد التيتانيوم TiO2 المحضر بطريقة Sol _ Gel}, author={Riyadh sami رياض سامي عنتر and Rafea A. Munef رافع عبد الله منيف and Fares Saleh Atallah فارس صالح عطاالله}, journal={Tikrit Journal of Pure Science مجلة تكريت للعلوم الصرفة}, volume={21}, number={2}, pages={162-170}, year={2016}, abstract={This report was conducted to study the molar effect on structural characteristics of Titanium dioxide TiO2 ,the deposition of films on glass substrates was done by using sol gel solution with Spin-Coting method (speed =3000 rpm) during 30 sec of the deposition where the solution have been prepared using Titanium hydroxyl Material Ti[O(CH2)3(CH3)]4 and C4H11NO2 as Fixative and Ethanol as a solvent. we have prepared different concentrations of solution (0.05, 0.10 , 0.15, 0.20, 0.30) M ,the films have been annealing with temperature (500 °C), we have investigated the Structural characteristics using (XRD,AFM and SEM) analyses. The (XRD) results have shown that the Anatase phase is the prevalent phase when the concentrations (0.05 and 0.10)M and after increase the concentration start changes gradually from Anatase phase to Rutile phase when the concentration (0.2)M. The SEM analyses have approved that the film has good topography. The granules had a rhombus form then its shape became cluster with the increasing of concentration . The (AFM) have shown that the membranes had nano- thickness,and they are soft with good coating

تم في هذا البحث دراسة التأثير المولاري على الخصائص التركيبية لثنائي أوكسيد التيتانيوم TiO2 حيث رسبت الاغشية على ارضيات من الزجاج باستخدام محلول (Sol_Gel) وبتقنية Spin_Coting وبسرعة RPM 3000 خلال زمن ترسيب قدره 30sec وتم تحضير المحلول باستخدام مادة اوكسيد التيتانيوم المائي Ti[O(CH2)3CH3]4 و [C4H11NO2] كمثبت والايثانول كمذيب (C3H8O2) وحضر المحلول بمولاريات مختلفة منM (0.05,0.1,0.15,0.2,0.3) ويتم تلدين الأغشية بدرجة حرارة 500℃ ,وتم دراسة الخصائص التركيبة من خلال فحوصات (XRD & AFM,SEM). حيث تبين من النتائج XRD)) ان طور الانتاس هو الطور السائد عند التركيزM 0.05)& (0.1 وبعد زيادة التركيز يبدا التحول التدريجي بالطور حيث يتحول من الانتاس الى الروتايل عند تركيز 0.2M, وبينت فحوصات SEM)) ان الغشاء ذو طبوغرافية جيدة ,وان شكل الحبيبات يكون معيني ثم يتحول بزيادة التركيز الى عناقيد زهرية الشكل, ومن خلال فحوصات(AFM) تبين ان الاغشية ذات سمك نانوي وناعمة وذات اكساء جيد .} }