TY - JOUR ID - TI - Fine Aggregate Ratios Effect on Mechanical and Physical Properties of Pervious Concrete تأثير نسب الركام الناعم على الخصائص الميكانيكية والفيزيائية للخرسانة النفاذة AU - Mohammed Sabah Irhayyim محمد صباح أرحيم AU - Muyasser Mohammed Jomaa’h ميسر محمد جمعه PY - 2016 VL - 34 IS - 9 Part (A) Engineering SP - 246 EP - 260 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - The porous concrete applications and the process of production in different ways depending on the replacement of fine or coarse aggregate components of research important topics, The study dealt with production pervious concrete by depending on normal concrete by removing fine aggregate by four percentage by weight (25%, 50%, 75%, 100%), as was the work of trail mixtures of concrete for a reference mix of were depended mixture the weight [1:1.5:3] with a ratio (W/C) is equal to (0.40), which recorded the highest compressive strength of age (7) days, by the results tests show that the increased rate of removal of fine aggregate contributed to reduce the strength and density with the increase in porosity and permeability and absorption, as less density obtained is (1756.2)kg/m3 remove the fine aggregate by (100%), which gives less strength to compressive (14.28)MPa and the highest value for porosity (24.81%), as were better strength to compressive, splitting tensile, and bending are (36.77MPa, 4.28MPa, 4.4MPa), respectively to the proportion of removing fine aggregate (25%) compared to the reference mixture.

تعد تطبيقات الخرسانة النفاذة وعملية انتاجها بطرق مختلفة اعتماداً على استبدال مكونات الركام الناعم او الخشن من المواضيع البحثية المهمة، لقد تناولت الدراسة انتاج خرسانة نفاذة باعتماد الخرسانة الاعتيادية المرجعية من خلال إزالة الركام الناعم بأربع نسبة وزنية(%25، %50، %75، %100)، إذ تم عمل خلطات خرسانية تجريبية للحصول على خلطة مرجعية وتم اعتماد الخلطة الوزنية[1:1.5:3] ذات نسبة (W/C) مساوية الى (0.40) والتي حققت اعلى مقاومة انضغاط بعمر (7) أيام، ومن خلال نتائج الفحوصات تبين ان زيادة نسبة الازالة للركام الناعم ساهمت في تقليل المقاومة والكثافة مع زيادة في المسامية والنفاذية والامتصاص، أذ إن اقل كثافة تم الحصول عليها هي kg/m3(1756.2) بإزالة الركام الناعم بنسبة (100%) والتي تقل بنسبة (24.8%) عن كثافة الخلطة المرجعية، والتي تعطي اقل مقاومة انضغاط MPa(14.28) وأعلى قيمة لحجم المسامات (24.81%)، إذ كانت افضل مقاومة للانضغاط والشد غير المباشر والانثناء هي(36.77MPa، 4.4MPa, 4.2MPa) على التوالي لنسبة إزالة الركام الناعم (%25) مقارنة مع الخلطة المرجعية. ER -