@Article{, title={Effect of Powder Concentration in PMEDM on Machining Performance for Different Die steel Types تاثير تركيز المسحوق في عميلة التشغيل بالتفريغ الكهربائي باستخدام مسحوق عالق بالسائل العازل على اداء التشغيل لانواع مختلفة من فولاذ القوالب}, author={Maan Aabid Tawfiq and Azzam Sabah Hameed}, journal={Engineering and Technology Journal مجلة الهندسة والتكنولوجيا}, volume={33}, number={9 Part (A) Engineering}, pages={2174-2186}, year={2015}, abstract={Electric discharge machining(EDM) is one of the nonconventional machining process which has been used in manufacturing complex shapes on hard material that are difficult to cut by conventional processes, especially, die casting, parts of aircraft, medical equipment, automobile industries. Powder mixed electric discharge machining(PMEDM), has emerged as one of the advanced techniques in the direction of the enhancement of the capabilities of EDM. The objective of the present research is to study the influence of process parameters such as peak current, pulse on time, manganese,aluminum, and aluminum-manganese mixing powder concentration on machining performance of different types of die steel (AISID3,AISID6,H13)with round copper electrode(20 mm diameter) on machining performance. Experiments have been designed using Taguchi method. Taguchi L27 orthogonal array has been selected for five factors 3 levels design. The machining performance has evaluated in terms of metal removal rate (MRR).It is found that manganese powder concentration mixed in dielectric fluid significantly affect the machining performance, maximum (MRR) is obtained at a high peak current(12 A), pulse on(200µs), and (4g/L) concentration of manganese powder,the optimum MRR is 17.56mm3/min with percent of error about 5.61% compared with the Experimental value.

عملية القطع بالشرارة الكهربائية من عمليات القطع غير التقليدية المستخدمة في تصنيع الاجزاء معقدة الاشكال باستخدام معادن ذات صلادة عالية وخاصة صناعة قوالب السباكة المعدنية،المعدات الطبية، واجزاء الطائرات. عملية القطع بالشرارة الكهربائية باستخدام مسحوق معدني ظهرت باعتبارها واحد من اهم الطرق المستخدمة لتحسين قدرات عميلة القطع بالشرارة الكهربائية .الهدف من البحث هو دراسة تاثير تركيز المسحوق المعدني و متغيرات العملية الكهربائية مثل التيار وزمن مكوث النبضة وقد استخدم ثلاثة انواع من المساحيق المعدنية وهي المنغنيز والالمنيوم ومزيج بين المنغنيز والالمنيوم بنسبة (25/75)% وحسب النسب الوزنية لتشغيل ثلاثة انواع من فولاذ القوالب وهي (AISID3,AISID6,H13)باستخدام قطب تشغيل دائري مصنوع من النحاس النقي(قطر 20 ملم) على معدل اداء القطع .تم اجراء مجموعة من التجارب تم تصميمها باستخدام طريقة تاكوجي,حيث تم اختيار 27 تجربة لخمس عوامل بثلاثة مستويات.اداء القطع تم تقيمه من خلال مصطلح معدل ازالة المعدن (MRR).وقد وجد من خلال النتائج ان تركيز مسحوق المنغنيز العالق بالسائل له تاثير كبير على اداء القطع حيث لوحظ بان اعلى معدل ازالة للمعدن تمت باستخدام تيار 12 امبير وزمن مكوث نبضة مقداره 200 مايكروثانية وتركيز مسحوق المنغنيز مقداره 4 غم/لتر، تم الحصول على الازالة المثلى بحدود التجارب ومقدارها 17.56 ملم3/دقيقة بنسبة خطا مقدارها 5,61% من القيمة التجريبية.} }