TY - JOUR ID - TI - Production of Friendly Environmental Material as Building Element from Plastic Waste إنتاج مادة صديقة للبيئة كعنصر بنائي من النفايات اللدنة AU - Mohanad Salih Farhan AU - Awadh E. Ajeel AU - Dheyaa Wajid Abbood ضياء واجد عبود PY - 2016 VL - 4 IS - 1 SP - 112 EP - 127 JO - Wasit Journal of Engineering Sciences مجلة واسط للعلوم الهندسية SN - 23056932 AB - This paper aims to produce cheap building elements environmentally friendly and of good thermal insulation using plastic waste. The study depends on adding plastic waste as aggregates to concrete mixes at different percentages by weight (12 percentages) to produce lightweight aggregate concrete of density (1095-1892) kg/m3. The experimental work includes 120 specimens of concrete consisting of 72 cubes with side length of 150 mm and 48 cylinders of 150x300 mm. The concrete specimens of the study are local raw materials without any admixture or treatment agents. The mechanical and thermal properties determined were compressive strength (f'c and fcu), static modulus of elasticity (Ec), density (ρ), thermal conductivity (k), specific heat capacity (Cp) and thermal expansion (α) after 7-days of curing at 20 °C. The increase in plastic waste content decreases the density of concrete; and that leads to lose in the mechanical properties of concrete but improves its thermal properties. The experimental results revealed that; the measured static modulus of elasticity is less than the predicted static modulus of elasticity according to ACI 318-2014 and ACI 213R-2003. All cubes specimens exposed to temperature 200, 400 and 600 °C exhibited gradual loss in the compressive strength of all mixes, and at 600 °C the strength of lightweight aggregate concrete were disintegrated. Lightweight aggregate concrete has two advantages; it is about 25% lighter than normal concrete in dead load, and it is capable to improve the thermal insulation of building blocks.

يهدف البحث إلى إنتاج عناصر بناء رخيصة، صديقة للبيئة وجيدة العزل الحراري باستخدام النفايات اللدنة. اعتمدت الدراسة على إضافة نفايات لدنة بنسب وزنية مختلفة (12 نسبة مئوية) لتعمل كركام في خلطات خرسانية لغرض إنتاج خرسانة خفيفة الوزن الركامي ذات كثافة تتراوح بين 1095 – 1892 كغم/م3. يتضمن العمل التجريبي 120 نموذج من الخرسانة منها 72 مكعب طول جانبه 150 ملم و 48 أسطوانة ذات 150x300 ملم. إن العينات الخرسانية للدراسة عبارة عن مواد خام محلية دون أية مضافات أو مواد معالجة. الخواص الميكانيكية والحرارية المراد اختبارها هي مقاومة الانضغاط f'c) و (fcu، معامل المرونة الاستاتيكي (Ec)، الكثافة (ρ)، التوصيل الحراري (k)، السعة الحرارية النوعية (Cp) والتمدد الحراري (α) بعد 7 أيام من المعالجة بدرجة حرارة 20 سيليزية. إن زيادة محتوى النفايات اللدنة يقلل كثافة الخرسانة مما يؤدي إلى انخفاض في خواصها الميكانيكية ولكن يحسن خواصها الحرارية. كشفت النتائج العملية أن معامل المرونة الاستاتيكي المقاس أقل من المحسوب من المواصفات الأمريكيةACI 318-2014 وACI 213R-2003 . وجميع النماذج المكعبة عند تعريضها إلى درجات الحرارة 200، 400 و 600 سيليزية ولكافة الخلطات الخرسانية انخفضت مقاومتها للانضغاط تدريجياً، وعند درجة 600 سيليزية تلاشت مقاومة النماذج الخرسانية خفيفة الوزن الركامي. إن الخرسانة خفيفة الوزن الركامي لها ميزتان؛ هي حوالي 25% أقل وزناً من الخرسانة الاعتيادية، ولها القابلية على تحسين العزل الحراري لمقاطع البناء. ER -