TY - JOUR ID - TI - Beneficiation Pretreatment and Chemical Activation Method For Preparation and Characterization of Nano Structure Bentonite استخدام المعالجة والتنشيط الكيمياوي لتحضير ودراسة خصائص بينتونايت نانوي AU - Adel Sharif Hamadi AU - Riyadh M. Noaman AU - Thamera Kidher AU - Ghassan Rokan AU - Maan Ali AU - Quraish abass AU - DinaNaumat AU - Hamsa Ahmed PY - 2015 VL - 33 IS - 9 Part (B) Scientific SP - 1683 EP - 1692 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - Bentonite has widely been employed in many industrial applications due to their physicochemical properties and availability at low cost. The aim of this work was conducted to submit the Iraqi natural bentonite clay to beneficiation pretreatment and chemical acidification using 60% sulfuric acid under mechanical agitation for 2 hours at atmospheric temperature and pressure condition. The resulting bentonite was washed several times with distilled water and modified with ethanol under ultrasonic mixing. An experimental study was conducted to study the chemical composition, grain size, structural characterization and morphology of nano particle bentonite obtained using techniques of AFM microscopy, X-ray fluorescence XRF, X-ray diffraction XRD, scanning electron microscopy SEM, surface area by BET method, and FT-IR spectra. The calculated surface area of nanobentonite was 161.842 m2/gm, and total pore volume of 0.2196 cm3/gm. The nanoscalebentonite particles diameter in the range of 52 nm at maximum intensity of AFM. The FITR spectra assigned peaks; at 3392.22 and 1635.69 cm-1 is attributed to OH stretching (Al-OH and Si-OH) for bentonite, at 1159, 798.20 and 677.46cm-1 are assigned to characteristic bands of silicates; and peak at 500.08 cm-1 is responsible for Al-O-Si group deformation. SEM analysis show that nanobentonite structure due to beneficiation and activation conditions. The results of X-ray diffraction after activation observed that the intensity of the reflections of the characteristic peak of the gypsum and calcite belonging to the other minerals change due to destruction of the structure in the bentonite phases.

يستخدم البنتونايت في تطبيقات صناعية عديدة نتيجة لخواصه الكيميائية والفيزيائية ولتوفره بكميات كبيرة وتكاليف منخفظة. ان الغرض من هذه الدراسة هو تحضير بنتونايت نانوي من خام البنتونايت العراقي باستخدام معالجة رفع الجودة والتنشيط الكيمياوي بحامض الكبريتيك ذو تركيز 60% ولفترة ساعتين عند درجة الحرارة الاعتيادية والضغط الجوي. لقد تم غسل البنتونايت الناتج عدة مرات بالماء المقطر وتم معاملته مع الايثانول باستخدام الخلاط الفوق صوتي. اجريت دراسة مختبرية للتركيب الكيميائي, حجم الدقائق ,خصائص التركيب الداخلي والمورفولجي للدقائق النانوية باستخدام تقنيات ميكروسكوب القوى الذري, تفلور بالاشعة السينية, حيود الاشعة السينية, المجهر الماسح الالكتروني,المساحة السطحية , قياس طيف الاشعة الحمراء.لقد كانت المساحة السطحية 161.842 m2/gm وحجم المسامات الكلي 0.2196 cm3/gm . القطر النانوي لدقائق البنتونايت عند اقصى شدة لل AFM هو nm52 . لقد اشر طيف FITR عند 392.22 و 1635.69 cm-1 لل OH(Al-OH and Si-OH) وعند 1159, 798.20 و 677.46 cm-1اشرت لاصرة السيلكات وعند 500.08 cm-1 للمجموعة Al-O-Si . لقد بينت صور الماسح الالكتروني SEM الشكل النانوي للبنتونايت نتيجة عملية رفع الجودة والتفاعلات الكيمياوية. حيود الاشعة السينية X-ray diffraction ايضا بينت التغيرات في اطوار البنتونايت بعد المعالجة. ER -