TY - JOUR ID - TI - Effect of Magnesium Addition on Corrosion Resistance of Aluminum -17%Silicon Alloy تأثير أضافة المغنيسيوم على مقاومة االتآكل لسبيكة المينيوم – سيليكون 17% AU - Muna Khethier Abbass منى خضير عباس AU - Khairia Salman Hassan خيرية سلمان حسن AU - Kayser Aziz Ameen قيصر عزيز أمين PY - 2016 VL - 12 IS - 4 SP - 50 EP - 58 JO - Al-Khwarizmi Engineering Journal مجلة الخوارزمي الهندسية SN - 18181171 23120789 AB - The electrochemical behavior of Al-17%Si alloy is investigated in 3.5wt% NaCl solution. Many alloys with addition of the different wt% magnesium metal of 1wt%, 2%, 3wt% ,4.5wt% ,and 9wt% were prepared by gravity die casting . The microstructures of prepared alloys were examined by optical and SEM microscopes. Corrosion behavior was investigated by using potentiostat instrument under static potentials test and corrosion current was recorded to determine corrosion resistance of all prepared samples. It was found that the addition of Mg metal improves the corrosion resistance of Al-17%Si alloy in 3.5%NaCl solution. The alloy containing 1%Mg shows less corrosion rate than the others while the alloys containing 4.5%Mg, 9%Mg content have the better pitting corrosion resistance than other alloys.

في هذا البحث تم دراسة السلوك الكهروكيمياوي لسبيكة (Al- 17%Si) في محلول (3.5 wt% NaCl)، وذلك باضافة معدن المغنيسيوم للسبائك وبنسب مختلفة (1wt%, 2wt%, 3wt%, 4.5wt%, 9wt%) حيث تم تحضير السبائك بواسطة قوالب الصب بالجاذبية.وقد تم استعمال المجهر الضوئي والمجهر الالكتروني الماسح لفحص التركيب المجهري للسبائك. وتم بحث اسلوب التآكل بواسطة استعمال جهاز المجهاد الساكن (Potentiostat) وتحت اختبار الجهد الساكن وتم تسجيل تيار التأكل وحساب مقاومة التأكل لكل النماذج المحضرة. وقد لوحظ انه عند اضافة معدن المغنيسيوم يزيد من مقاومة التأكل في سبائك (Al-17%Si) في محلول (3.5% NaCl). ولوحظ ايضاً ان السبائك الحاوية على (1% Mg) اظهرت اقل معدل تآكل من السبائك الاخرى بينما كانت السبائك الحاوية على (9% Mg, 4.5% Mg) تمتلك افضل مقاومة للتاكل النقري من باقي السبائك. ER -