TY - JOUR ID - TI - Prediction of Performance of Rotary Bottom Hole Assembly For Directional Well AU - Hassan Abdul Hadi Abdul Hussien AU - Dr.A.A.AL-Dabaj AU - Dr.Mohammed S.AL-Jawad PY - 2013 VL - 191 IS - 9th SP - 1 EP - 15 JO - Journal of Petroleum Research & Studies مجلة البحوث والدراسات النفطية SN - 22205381 27101096 AB - A finite element model was constructed to predict inclination tendency for multistabilizer rotary BHA in three dimensions, static condition. The bottom hole assembly was idealized with beam element capable of resisting axial forces, bending moments about the two principal axes, and twisting moments about its centroidal axis. Bit and stabilizer were treated as contact point and restricted from movement in all directions. Each element is loaded with gravity and normal contact forces.Model validation showed closer agreement between the model and Jiazhi's method (analytic) for slick, single, and two stabilizers BHA, compared to Akgun results. Predictions with finite element model showed that for building assembly, the weight on bit had small effect on bit side force especially in high angle wells. Also inclination tendency (building, dropping) would depend on position of the stabilizer, diameter of drillcollar behind the bit, and number of stabilizers.

تم بناء نموذج شريحة محدودة ثلاثي الإبعاد لغرض تخمين قابلية بناء الزواية لمجموعة قاع البئر الدورانية المتعددة المثبتات في ظروف السكون.حيث تم معاملة مجموعة قاع البئر كشريحة بيم ذو قطبين لكل قطب ست درجات من الحركة ،في حين تم معاملة الحافرة والمثبت على أساس نقاط تماس محدودة الحركة في جميع الاتجاهات. عند مقارنة النتائج المستحصلة من هذا النموذج مع طريقة جياشي(الطريقة التحليلية) ونتائج أخان لمجموعة قاع البئر الانزلاقية وذات المثبت الواحد وذات المثبتين وجد هنالك تقارب جيد. نتائج التحليل بهذا النموذج بينت ان تأثير الوزن المسلط على الحافرة على القوة الجانبية يكون قليل وخاصة عند الآبار ذات الميل العالي بالإضافة إلى ذلك فأن قابلية الميل(بناءوهبوط) لمجموعة قاع البئر تعتمد على موقع المثبت وقطر الأنابيب الثقيلة خلف الحافرة وعلى عدد المثبتات في المجموعة. ER -