TY - JOUR ID - TI - New Development in Catalytic Reforming Process to Produce High Octane Gasoline AU - Khalid A. Sukkar AU - Hayam M. Abd Al-Raheem AU - Layth S. Sabry AU - Lattif A. Resym PY - 2014 VL - 377 IS - 10th SP - 223 EP - 244 JO - Journal of Petroleum Research & Studies مجلة البحوث والدراسات النفطية SN - 22205381 27101096 AB - In this work, improved catalytic reforming reaction was carried out through using reaction promoters Sn, in and Ge. Four types of catalysts were prepared: Pt/HY, Pt-Sn/HY, and Pt-Sn-In/HY, and Pt-Sn-Ge/HY. The weight percentage of metals were 0.5 % for Pt and 0.1% for each of Sn, In and Ge. The performances of catalysts (activity, selectivity and catalyst stability) were studied using Iraqi heavy naphtha of Al-Dura refinery (Baghdad) as feedstock. The catalytic reforming unit consisted of a vertical tubular stainless steel reactor of 20mm internal diameter, 30 mm external diameter and 680 mm height. The operating pressure was atmospheric, and the operating temperatures varied between 425 to 525 oC. For all experimental runs: the weight hourly space velocity WHSV =2, the catalyst amount = 50 g, and H2/HC ratio =3. The results showed that the best reforming temperature over all four types of prepared catalysts was 475 oC which gave the highest conversion of heavy naphtha to high octane products (aromatics and branched isomers). It was concluded that the trimetallic catalyst Pt-Sn-In/HY and Pt-Sn-Ge/HY show high selectivity to desired reforming products with 91.5% and 85% respectively. On the other hand, the Pt-Sn/HY and Pt/HY, catalysts show slectivities of 79% and 74% respectively. The results indicated a clear increase in catalyst stability with high resistance to coke formation for catalysts promoted with In and Ge as a third metal. Also, it was noted that the production of aromatics and isomers are increased for both types of trimetallic catalysts Pt-Sn-In/HY, and Pt-Sn-Ge/HY under the same operating conditions.

في هذا البحث تم اعداد دراســة لغرض تطوير عملية التهذيب بالعامل المساعد باستخدام مرقيات للعوامل المساعدة المستخدمة في العملية (Sn, In and Ge)، حيث تم تحضير اربعة انواع من العوامل المساعدة المحملة على الزيولايت نوع Y Pt/HY, Pt-Sn/HY, and Pt-Sn-In/HY, and Pt-Sn-Ge/HY بنسب معادن 0.5% للبلاتين و 0.1% لكل من Sn In و Ge. تم دراسة اداء العوامل المساعدة المحضرة باستخدام مـادة النفثـا العراقيـة الثقيـلة (مصفى الدورة) كمادة اولية للعملية. تم الدراسة في منظومة مصنعة من الحديد المقاوم للصدى بأبعاد 20 و30 ملم للقطر الداخلي والخارجي للمفاعل وبطول 680 ملم. الضغط المستخدم كان ضغط جوي واحد ودراسة التفاعل بمدى حرارة تتراوح بين (425-525 م°)، و WHSV=2 و 50 غم من وزن العامل المساعد، ونسبة H2/HC=3. أظهرت النتائج أن أفضل حرارة للعوامل المساعدة المستخدمة كانت 475 م° والتي أعطت أعلى نسبة تحول من النفثا الثقيلة للمركبات العطرية والايزومرات المتفرعة التي تمتلك عدد اوكتاني عالي. أثبتت النتائج ان العوامل المساعدة ثلاثية المعدن نوع Pt-Sn-In/HY, and Pt-Sn-Ge/HY أعطت انتقائية عالية بأتجاة المركبات ذات العدد الاوكتاني، وبنسبة .591% و 85% على التوالي. كما اظهرت العوامل المساعدة نوع Pt/HY و Pt-Sn/HYانتقائية بمقدار 74% و79% على التوالي. ومن جانب اخر اثبتت النتائج ان اضافة المعدن الثالث نوع الجرمانيوم والانيديوم نتج عنة استقرار عالي للعوامل المساعدة مع مقاومة لتكون الكاربون وفقد الفعالية. كما تم ملاحظة زيادة أنتاج المواد عالية العدد الاوكتاني عند استخدام العوامل المساعدة ثلاثية المعدن Pt-Sn-In/HY, and Pt-Sn-Ge/HY عند نفس الظروف التشغيلية. ER -