TY - JOUR ID - TI - MECHANICAL PROPERTIES OF POLYPROPYLENE PLASTELIZED BY CHLOROPHYLL الخواص الميكانيكية للبولي بروبولين الملدن بالكلوروفيل AU - Abdulawahab A. Sultan عبد الوهاب عبد الرزاق سلطان AU - Mohammed H. Ali Al-Mosawi محمد حسن علي الموسوي AU - Hanaa K. Mousa هناء كاظم موسى PY - 2016 VL - 7 IS - 3 SP - 55 EP - 65 JO - KUFA JOURNAL OF ENGINEERING مجلة الكوفة الهندسية SN - 20715528 25230018 AB - There are many of industrial plasticizers materials used to improve mechanical properties of polypropylene. In this study chlorophyll, natural pigment is used. Its eco – friend and not toxic material, extracted from plants. The chlorophyll, natural pigment is extracted and mixed with polypropylene with following weight percentages (0.0, 0.1, 0.25, 0.5, 0.75, and 1.0), then extruded as a sheet by screw extrusion machine. The mechanical properties of specimens are examined by mechanical testing, such as (Tensile test, Impact test).The results showed improvements in mechanical properties of polypropylene plasticized by chlorophyll. Where it gives ultimate tensile strength of (32.64, 33.972, 44.63, 40.633, 33.306, and 45.962) Mpa, the modulus of elasticity of (439.27, 1040, 1195.63, 700, 1785, and1525) Mpa, the maximum elongation % at fracture of (24.46, 16.182, 19.632, 61.584, 17.587, and 12.121) mm/mm %, and impact strength of (0.1, 0.2, 0.25, 0.355, 0.24, and 0.2) Joule, respectively with each chlorophyll addition weight percent wt%.The polypropylene blend consisting chlorophyll of 0.5 wt % presents significant improvements of mechanical properties, high ductility, and impact strength, suitable ultimate strength, and modulus of elasticity.

هنالك العديد من المواد الملدنة الصناعية لتحسين الخواص الميكانيكية للبولي بروبيلين. في هذه الدراسة استعملت صبغة الكلوروفيل الطبيعي، انها مادة صديقة للبيئة وغير سامة استخرجت من النباتات، عوملت ومزجت مع البولي بروبيلين بالنسب التالية (0.0، 0.1، 0.25، 0.5، 0.75، 1.0) ثم بثقت على شكل صفائح بواسطة ماكنة بثق لولبية، ان الخواص الميكانيكية للعينات تم فحصها بالاختبارات الميكانيلة (اختبار الشد، اختبار الصدم).اظهرت نتائج الاختبارات تحسن في الخواص الميكانيكية للبولي بروبلين الملدن بواسطة الكلوروفيل حيث اعطى مقاومة شد (32.64، 33.972، 44.6.3، 40.633، 33.306، 45.962) MPA، ومعامل مرونة (439.27، 1040، 1192.63، 700، 1785،1525) MPA واقصى استطالة قبل الكسر (24.46، 16.182، 19.632، 61.584، 17.587، 12.121)MM/MM% ومقاومة الصدم (0.1، 0.2، 0.25، 0.355، 0.24، 0.2)JOULE على التوالي مع كل نسبةاضافة كلوروفيل وزنية WT %..ان خليط البولي بروبلين المحتوي على 0.5 WT % كلوروفيل ابدى تحسن ملحوظ في الخواص الميكانيكية، مطولية ومقاومة صدم عاليتين واقصى مقاومة شد ومعامل مرونة مناسبتين. ER -