TY - JOUR ID - TI - Improving Mechanical Properties of Polymer Modified Concrete Using Micro-Steel Fiber and Silica Fume AU - Muhammad Abed Attiya PY - 2017 VL - 25 IS - 1 SP - 212 EP - 223 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - The use of Steel Fiber Reinforced Concrete (SFRC) is to improve the structural behavior such as increasing the resistance to cracking and crack propagation. This work has been made to study the properties of polymer modified concrete when micro-steel fiber is incorporated at different volumetric percentages from 0.1 % to 2 %. Two mixes (1:1.5:2 and 1:2:4) have been used and modified with styrene butadiene rubber resin (SBR) and silica fume with maintaining water cement ratio at 0.45. It has been found that increasing steel fiber content in concrete has a significant influence on the increase compressive, tensile, flexural strength, modulus of elasticity and stress- strain relationship. Flexural strength increases from 4.14 MPa (for 0% steel fiber) to 11.83 MPa (for 2% steel fiber). Whereas, the modulus of elasticity is improved by about 77% (for 1:1.5:2 mixes) and 91% (for 1:2:4 mixes).

تستعمل الخرسانة المسلحة بألياف الحديدِ (SFRC) لتحسّينَ السلوكَ الإنشائي مثل زيَاْدَة مقاومة التَصَدُّع والحد من تمدد التشققات. في هذا البحث تم دراسة تأثير إضافة ألياف الحديد (micro-steel fiber) كنسب مئوية حجميه مختلفة تتراوح من 0.1 % إلى 2 % على خواص الخرسانة المعدلة باستخدام مضافات البوليمرات (polymer modified concrete). حيث تم استخدام نوعين من الخلطات ((1:1.5:2 و1:2:4) ومع نوعين من المضافات هما styrene butadiene rubber resin (SBR) و silica fume مع بقاء نسبة الماء/ سمنت ثابته (0.45). وُجِدَ إن زيادة محتوى ألياف الحديد في الخرسانةِ لَهُ تأثير واضح على زيادة مقاومة الانضغاط، الشد والانثناء. وكذلك زيادة قيم معامل المرونة وتحسن علاقةِ الإجهادِ-الانفعال stress-strain relationship. ِلوحظ خلال هذه الدراسة إن مقاومة الانثناء ازدادت من 4.14 MPa بدون استخدام ألياف الحديد (0% steel fiber) إلى 11.83 MPa باستخدام ألياف الحديد بنسبة (2% steel fiber). كذلك معامل المرونة تحسن بنسبة 77% للخلطة (1:1.5:2 ) و بنسبة 91% للخلطة (1:2:4). ER -