@Article{, title={EXPERIMENTAL AND NUMERICAL STUDY OF BENDING BEHAVIOR FOR HONEYCOMB SANDWICH PANEL WITH DIFFERENT CORE CONFIGURATIONS دراسة نظرية وعملية لسلوك الانحناء لقلب لوح خلية النحل لأشكال مختلفة}, author={Doaa Fadhel Mohammed(1) Asst. Prof. Dr. Hani Aziz Ameen(2) Dr. Kadhim Mijbel Mashloosh(3) دعاء فاضل محمد ا.م.د.هاني عزيز امين د.كاظم مجبل مشلوش}, journal={Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد}, volume={16}, number={4}, pages={315-328}, year={2016}, abstract={Honeycomb sandwich panel dies are manufactured with different core shapes (hexagonal, circular and square), each shape have two types of facing, one of aluminum facing AA3003 with different thicknesses(0.5mm, 0.9mm &2mm) and the other of composite facing (E-glass+epoxy resin) with(2-layers and 3-layers). Three point bending test is used to investigate the strength of these honeycombs. The results shown that the square honeycomb's core shape have the highest load from the other core shapes and the hexagonal have the lowest value and this value increased by increasing the facing thickness, and the aluminum skin facing have higher load than the composite skin facing. The strength to weight ratio was calculated and its conclusion observed that the square honeycomb core shape have the maximum ratio and the circular honeycomb core shape have the minimum ratio. ANSYS software was used to analyze the honeycomb structure by madea model in APDL-ANSYS program in static and natural frequency tests using solid and shell elements and MPC algorithm. Results shown that there are the variations in deflection by percentage of error 27%. The dynamic test observed that the changing of skin facing thickness effect in the natural frequencies by (3%-30%) and the changing of the core configurations by (19.7%-38.8%), and by changing the facing material the natural frequencies effected by (10.6%-37.3%).

في هذا البحث تم تصميم وتصنيع قوالب ألواح شطيرة خلية النحل لإنتاج ثلاثة أشكال مختلفة لقلب خلية النحل (سداسي, دائري, مربع) كل شكل يتضمن نوعين من ألواح الألمنيوم احدهما ذو غلاف من الألمنيوم ( 3003AA) وبأسماك مختلفة (0.5 مم, 0.9 مم,2 مم) بينما يحتوي النوع الثاني على غلاف مركب من طبقتين وثلاث طبقات من الألياف الزجاجية والمادة الرابطة. تم إجراء الفحوصات لعينات خلية النحل باختبار الانحناء وقد أظهرت النتائج إن خلايا النحل المربعة الشكل تتحمل أحمال أعلى من الأشكال الأخرى بينما الخلايا السداسية الشكل تتحمل اقل حمل من بين الأشكال الأخرى وان قيمة التحمل هذه تزداد بزيادة سمك الغلاف للخلية كما إن غلاف الألمنيوم له القابلية على تحمل أحمال أعلى من الصفائح المركبة لنفس السمك . تم إيجاد نسبة الإجهاد إلى الحمل وقد أظهرت نتائج الحسابات إن الخلايا المربعة الشكل حققت النسبة الأعلى أما الخلايا الدائرية الشكل فقد حققت اقل نسبة من بين الأشكال الأخرى. تم استخدام برنامج SSY لتحليل تركيب خلايا النحل عدديا لإجراء اختبار الحمل المنتظم واختبار التردد الطبيعي وقد أظهرت النتائج إن هنالك اختلاف في التشوهات الحاصلة مع النتائج العملية وان نسبة الاختلاف كانت %. كما أظهرت تحليلات الترددات الطبيعية إن التغير في سمك طبقة الغلاف يؤثر على الترددات الطبيعية بنسبة (-%) كما وجد إن تغيير شكل الخلية يؤثر على الترددات الطبيعية بنسبة (%-%) كما إن تغيير معدن الغلاف يؤثر على الترددات الطبيعية بنسبة (-  ).} }