TY - JOUR ID - TI - Effect of Heat Treatments on the Tensile Properties and Impact Toughness of (6063) Aluminum Alloy تأثير المعاملات الحرارية على خصائص الشد ومتانة الصدمة لسبيكة الالمنيوم(6063) AU - Abdalla H. Mihdy Jassim عبدالله حسن مهدي جاسم PY - 2015 VL - 3 IS - 20 SP - 169 EP - 179 JO - Al-Qadisiyah Journal of Pure Science مجلة القادسية للعلوم الصرفة SN - 19972490 24113514 AB - The effect of heat treatments on the tensile properties and impact toughness of (6063) aluminum alloy have been studied. This study aims to preparing the aluminum alloy (6063) and study the effect of solid solution temperature, ageing time and the ageing temperature on the tensile properties and impact toughness. Preparing alloy samples were homogenized at 560℃ for 2h, then they were solution heat treated at various temperatures (500, 530,560)ºC for 1 h and then rapidly quenched in water at room temperature. The quenched specimens were then aged at (150,175, and 200)ºC for different time periods. The results showed that the best solution treatment temperature is 530ºC and the best ageing temperature is 175ºC. The highest value of the tensile strength and yield stress are (288.6 and 264.5)Mpa respectively, in samples aged at 175ºC for 6h, while the highest value of impact toughness is 24.6J in samples aged at 175ºC for 2h. The specimens with the lowest impact toughness corresponds to the highest value of the tensile strength and yield stress for all ageing temperature

تم دراسة تأثير المعاملات الحرارية على خصائص الشد ومتانة الصدمة لسبيكة الالمنيوم 6063 . الدراسة الحالية تهدف الى تحضير سبيكة الالمنيوم 6063)) ودراسة تأثير درجة المعاملة المحلولية , زمن التعتيق ودرجة حرارة التعتيق على خصائص الشد ومتانة الصدمة. نماذج السبائك المحضرة تم مجانستها بدرجة حرارة 560℃ ولمدة ساعتين ثم المعاملة المحلولية بدرجات حرارة مختلفة (500, 530,560)ºC ولمدة ساعة واحدة ثم تم اخمادها بسرعة في الماء بدرجة حرارة الغرفة . بعد ذلك النماذج المخمدة تم تعتيقها بدرجات حرارة (150,175, and 200)ºC ولفترات زمنية مختلفة. النتائج اظهرت بأن افضل درجة معاملة محلولية هي 530ºC وافضل درجة حرارة تعتيق هي 175ºC. اعلى قيمة لمتانة الشد واجهاد الخضوع هي (288.6 and 264.5)Mpa على التوالي في النماذج المعتقة بدرجة حرارة 175ºC ولمدة 6 ساعة بينما اعلى قيمة لمتانة الصدمة هي 24.6J في النماذج المعتقة بدرجة حرارة 175ºC ولمدة 2 ساعة. النماذج التي لها اقل قيمة لمتانة الصدمة تقابل اعلى قيمة لمتانة الشد واجهاد الخضوع ولجميع درجات حرارة التعتيق. ER -