TY - JOUR ID - TI - The Effect Of The Hybrid Additions on the Bending and Tensile Behavior for the Hybrid Composite Material Reinforced by Short Fibers and the Zeolite Particles by Multifarious Grain Size تأثير الاضافات الهجينة على سلوك الشد والانحناء لمادة متراكبة هجينة مقوات بالياف قصيرة ودقائق الزيوليت باحجام حبيبية متنوعة AU - Hayder Abbas Sallal حيدر عباس صلال PY - 2017 VL - 20 IS - 1 SP - 113 EP - 119 JO - Al-Nahrain Journal for Engineering Sciences مجلة النهرين للعلوم الهندسية SN - 25219154 25219162 AB - Consider polymers and polymer matrix composite are the basis of the most prevalent material in all industrial and medical fields because of its properties qualify to occupy an advanced position among other engineering materials because of its good properties. Therefore, This work focuses on the preparation of base polymer matrix composite materials and study non-saturated polyester as matrix has been strengthened by zeolite particles different grain sizes (25 - 65 - 75) µm and different volume fractions (1,5 - 3 - 4,5 - 6 - 7,5 - 10) % was strengthened by Carbon short fibers and constant volume fraction (8%),the tests tensile and bending according to ASTM specifications, respectively. Through the results it was observed that the maximum tensile strength improved through hybrid reinforcement when reached the maximum value when the grain size (25 µm ) and at volume fraction (7.5%), reaching ( 94 N/mm2 )compared with the rest of sizes and at the same volume fraction reaching (78 N/mm2 for 65 µm , 69 N/mm2 for 75 µm), As for the bending test has been getting maximum Flexural resistance at grain size (25 µm) at volume fraction ( 6%) reached to(111 N/mm2) ,if compared with the rest of sizes at the same volume fraction reaching (100 N/mm2 for 65 µm,79 N/mm2 for 75 µm) while was obtained on the maximum bending modulus at grain size (25 µm) and at volume fraction (10%) reach to (8099 N/mm2) if compared with the rest of sizes at the same volume fraction reaching (7466 N/mm2 for 65 µm, 6666 N/mm2 for 75 µm ). Through the results we note that for the particle size and fiber effect in improving the mechanical behavior of the composite material prepared.

تعتبر البوليمرات والمواد المتراكبة ذات اساس بوليمر من اكثر المواد انتشارا في كافة المجالات الصناعية والطبية لما تتمتع به من خواص تؤهلها لاحتلال مركز متقدم من بين المواد الهندسية الاخرى لما تتمتع به من خواص جيدة . لذلك , في هذا العمل ركز على دراسة مادة متراكبة ذات اساس بوليمري حيث تم دراسة البولي أستر الغير مشبع كأرضية وتم تقويته بدقائق الزيوليت بأحجام حبيبية مختلفة ( 25 – 65 – 75 µm( وكسور حجمية مختلفة ( 1,5 – 3 – 4,5 – 6 – 7,5 – 10 )% وتم تقويته بالياف كاربون قصيرة وبكسر حجمي ثابت مقداره ( 8% ) , وتم اجراء اختبار الشد والانحناء حسب المواصفات الامريكية على التوالي .ومن خلال النتائج لوحظ ان مقاومة الشد القصوى تحسنت من خلال التقوية الهجينة الماخوذة وبلغت قيمتها القصوى عند الحجم الحبيبي (25 µm( وعند كسر حجمي (7,5 %) حيث بلغت (94N/mm2 ) مقارنة مع باقي الاحجام وعند نفس الكسر الحجمي حيث بلغت ( 78 N/mm2 للحجم 65 µm – 69 N/mm2 للحجم 75( µm , اما بالنسبة لاختبار الانحناء فقد تم الحصول على اقصى مقاومة انحناء عند الحجم الحبيبي (25 µ) وعند كسر حجمي (6%) حيث بلغت ( 111( N/mm2 اذا ماقورن مع باقي الاحجام عند نفس الكسر الحجمي حيث بلغت ( 100 N/mm2 للحجم 65 µm 79 N/mm2, للحجم 75( µm بينما تم الحصول على اعلى معامل انحناء عند الحجم الحبيبي (25( µm وعند كسر حجمي (10%) حيث بلغت ( 8099( N/mm2 اذا ماقورن مع باقي الاحجام عند نفس الكسر الحجمي حيث بلغت (7466 N/mm2 للحجم 65 6666 N/mm2, µm للحجم 75 µm ) من خلال النتائج نلاحظ ان للحجم الحبيبي والالياف تاثير في تحسين السلوك الميكانيكي للمادة المتراكبة المحضرة. ER -