@Article{, title={Effect of Nano (Y2O3 ) on the Mechanical Properties of the (PS:NR:PMMA) Polymer Blend Composite التحقق من تأثير مادة Y2O3 النانوية على الخواص الميكانيكية (PS:NR:PMMA) لمزيج مركب بوليمري}, author={Waleed Bdaiwi وليـد بديـوي}, journal={Academic Science Journal مجلة العلوم الاكاديمية}, volume={13}, number={2 - part 2}, pages={10-32}, year={2017}, abstract={Study of the mechanical properties of polymer blend composite to the preparation of matrix Unsaturated Polyester resin (UPS) with natural rubber (NR) and polymethyl methacrylate (UPS:NR:PMMA) material and study influence Nano Yttrium Oxide (Y2O3) on the composite . The first group is the preparation of samples of the mixture of polyester matrix with natural rubber material in ratio certain, It was examined the mechanical properties: tensile, flexure at break, young modules, hardness and compression decreases with increases the natural Rubber ratio but Elongation test increases when increases Rubber ratio. The second group is the samples preparation of the mixture of polyester with PMMA material, test mechanical properties decreases with increases the PMMA ratio. Third group was prepared from a mixture of polymer blend composite, which consists of fixed ratios of polyester, natural rubber and PMMA. Addition of Nano material Y2O3 at ratio (0.25-1.5) wt% .result test mechanical properties increases with increases the Y2O3 ratio.

دراسة الخواص الميكانيكية المزيج مركب بوليمري والذي حضر من البوليستر الغير مشبع وهو مادة الاساس (UPS) مع المطاط الطبيعي (NR) ومادة البولي مثيل ميثا اكرليت (PMMA) , ودراسة تأثير مادة الالترليوم النانوية (Y2O3) على المركب .المجموعة الاولى حضرت بإضافة المطاط الطبيعي بنسب معينه الى مادة الاساس البولي استر وتم دراسة الخواص الميكانيكية وهي : ( الشد , الانحناء , ومعامل يونك ,الصلادة و الانضغاط وقد تبين من خلال الاختبار انها تقل مع زيادة نسبة المطاط في المركب . المجموعة الثانية هي إضافة مادة PMMA على المادة الاساس البولي استر وبنسب معينه ومن خلال الفحوصات الميكانيكية تبين انمها تقل مع زيادة نسبة PMMA. اما المجموعة الثالثة تم تحضير عينات من مزيج مركب بوليمري يتكون من مادة الاساس البولي استر مع تثبيت نسبة المطاط الطبيعي وتثبيت نسبة PMMA ودراسة تأثير مادة Y2O3 وبنسب تتراوح بين (0.25-1.5)% من مادة الاساس . وتبين من خلال الفحوصات الميكانيكية ان الخواص الميكانيكية اعلاه تزداد مع زيادة نسبة دقائق الالترليوم النانوية.} }