@Article{, title={Numerical Modelling of Subsurface Cavities Using 2D Electrical Resistivity Tomography Technique النمذجة الرقمية للفجوات تحت السطحية باستخدام طريقة المقاومة النوعية الكهربائية التصويرية ثنائية البعد}, author={Asem Ahmed Hassan عاصم احمد حسن}, journal={Academic Science Journal مجلة العلوم الاكاديمية}, volume={13}, number={2 - part 2}, pages={197-216}, year={2017}, abstract={The formation of subsurface cavities in karstic rocks causes serious engineering problems for shallow and deep foundations. These cavities restrict the urban development and trigger significant geotechnical and geoenvironmental hazards. In this work, 2D Electrical Resistivity Tomography (ERT) technique was adopted to simulate subsurface cavities commonly formed in limestones using Wenner, Wenner-Schlumberger and Dipole- Dipole arrays. Air and water filled cavities were modelled utilizing blocky L1 norm and smooth L2 norm optimization methods. The results showed that subsurface cavities can well be detected particularly at low resistivity noise levels. Their geometry and position are reasonably indicated using L1 norm method due to the sharp resistivity variations especially for air filled cavity model while L2 norm method produces gradual resistivity boundaries for both air and water filled cavities. Dipole- Dipole array and L1 norm method perform better in delineating geometry and position of both air and water filled cavities. It is suggested that ERT technique using Dipole- Dipole array, as non- invasive tool, can be adopted for detecting subsurface cavities in karstic rocks to avoid the catastrophic effects of these features.

ان تكون الفجوات تحت السطحية في الصخور الكارستية تؤدي الى مشاكل هندسية خطيرة في الاسس الضحلة والعميقة. ان هذه الفجوات تحد من تطور المناطق الحضرية وتؤدي الى مخاطر جيوتكنيكية وبيئية كبيرة. في هذه الدراسة، تم استخدام طريقة المقاومة النوعية الكهربائية التصويرية ثنائية البعد في محاكاة الفجوات تحت السطحية الشائعة في الصخور الجيرية بأستخدام ترتيبات فنر، فنر- شلمبرجر وثنائي القطبين. لقد تمت المحاكاة الرقمية لفجوات مملوءة بالهواء والماء باستخدام معياري L1 و L2. لقد بينت النتائج ان الفجوات تحت السطحية قد امكن الكشف عنها وان موقع وشكل هذه الفجوات تم تحديده بشكل جيد خاصة عند مستويات واطئة للتشويش باستخدام طريقة معيار L1 نتيجة للتغيرات الحادة في المقاومة النوعية خاصة بالنسبة للفجوات المملوءة بالهواء بينما انتجت طريقة المعيار L2 تغير تدريجي في المقاومة النوعية لكلا النوعين من الفجوات. ان ترتيب ثنائي القطبين والمعيار L1 اعطى نتائج افضل في الكشف عن شكل وموقع الفجوات مقارنة بترتيبي فنر وفنر- شلمبرجر، ولهذا اقترح اعتماد هذا الترتيب عند استخدام طريقة المقاومة النوعية الكهربائية التصويرية ثنائية البعد في الكشف عن الفجوات لتجنب الاثار الكارثية لها.} }