@Article{, title={Experimental Study on Heat Transfer and Friction Factor Characteristics of Single Layer Graphene Based DI-water Nanofluid in a Circular Tube under Laminar Flow and Different Heat Fluxes as Boundary Conditions دراسة تجريبية على خصائص انتقال الحرارة ومعامل الاحتكاك لمائع نانوي احادي الطبقة (كرافين-ماء) في انبوب دائري تحت الجريان الانسيابي واحمال حرارية مختلفة كشروط حدودية}, author={Hussein A. Ibrahim حسين علاوي ابراهيم and Najdat N. Abdullah نجدت نشأت عبدالله}, journal={Journal of Engineering مجلة الهندسة}, volume={23}, number={5}, pages={106-122}, year={2017}, abstract={An experimental study was performed to estimate the forced convection heat transfer performance and the pressure drop of a single layer graphene (GNPs) based DI-water nanofluid in a circular tube under a laminar flow and a uniform heat flux boundary conditions. The viscosity and thermal conductivity of nanofluid at weight concentrations of (0.1 to 1 wt%) were measured. The effects of the velocity of flow, heat flux and nanoparticle weight concentrations on the enhancement of the heat transfer are examined. The Nusselt number of the GNPs nanofluid was enhanced as the heat flux and the velocity of flow rate increased, and the maximum Nusselt number ratio (Nu nanofluid/ Nu base fluid) and thermal performance factor was (1.45) and (1.24) respectively, by using (1wt%) concentration and q=6104W/m2 heat flux. Finally, an analysis of the thermal performance factor shows that the GNPs nanofluids could work as a good alternative conventional working fluid in thermal heat transfer applications.

تم اجراء دراسة تجريبية لحساب خصائص انتقال الحرارة القسري وانخفاض الظغط لمائع نانوي احادي الطبقة (كرافين-ماء) في انبوب دائري لجريان انسيابي وحمل حراري منتظم كشروط حدودية. اللزوجة والموصلية الحرارية للمائع(0.1-1wt%) النانوي تم قياسها.تأثير سرعة الجريان,الحمل الحراري وتركيز الجزيئات النانوية على تعزيز انتقال الحرارة تم تحريها.النتائج بينت ان عدد نسلت للمائع النانوي (كرافين-ماء) يزداد بزيادة الحمل الحراري وسرعة الجريان.واعظم نسبة عدد نسلت (عدد نسلت مائع نانوي/عدد نسلتمائع اساسي) ومعامل الاداء الحراري كان (1.45) و(1.24) على التوالي, باستخدام تركيز (1wt%) وحمل حراري (6104W/m2). واخيرا تحليل معامل الاداء يبين ان المائع الانوي كرافين يمكن ان يعمل كبديل جيد للموائع التقليدية في تطبيقات انتقال الحرارة.} }