TY - JOUR ID - TI - Synthesis and Characterization of Copper Substituted Lithium Nano Ferrites by Sol-Gel Auto combustion دراسة خواص اوكسيد الحديد النانوي المعوض بأيونات النحاس واليثيوم والمحضر بطريقة الاحتراق الذاتي للسائل الهلامي AU - Ali I. Salih 1, Sabah M. Ali Ridha 2 & Farah Yaseen Ismael 3 علي اسماعيل صالح 1 ، صباح محمد علي رضا2 ، فرح ياسين اسماعيل PY - 2017 VL - 12 IS - 2 SP - 195 EP - 216 JO - Kirkuk Journal of Science مجلة كركوك للعلوم SN - 30054788 30054796 AB - In this work sol-gel method used for preparing nanoscale iron oxide ferrites dopant by copper and lithium, which carries the chemical formula Li1-xCuxFe5O8 where x is the added ratio as molar ratio (x = 0,0.1,0.2,0.3,0.4,0.5,0.6 and 1), during the self- combustion for sol-gel which happen at temperature of 200oC, after that the samples were divided into four groups , the first group namely that have not been annealed while the other groups ; the second, third and fourth were annealed at 500oC , 700oC and 900oC respectively.In this work the crystalline structure have a dominate phases which have been studied by using the X-ray diffraction as well as examination of the electron microscope and examine the infrared -mediated model of Fourier Transform Infrared Spectrometer either the topography of the surface has been studied by using an atomic force microscope, examine the properties of electrical capacitive mediated capacitance measuring device, resistance and the inductor also studied. And indirectly through these tests was to know the size of the structural unit of the crystal density theory and fixed lattice, as well as the size of the grain has been measured by X-ray diffraction, while a microscopic blocs have checked mediated electron microscopy scan scanner, either measuring the size of the granules on the surface of the sample and the coefficient of roughness has been measured mediated by an atomic force microscope and the type of bonds that bind atoms in the crystal and the type of crystalline eccentric may checked mediated infrared while measuring the properties of capacitive and portability electrical conductivity of the alternating current it may have been mediated by checking capacitive properties.he current study focuses on measuring the properties of capacitive, which takes into account the effect of changing the copper content in the samples and the degree of sintering temperature as well as the change altered applied to the samples from the external voltage source, as well as the loss of electric power when the power is in the passage of the samples

في هذا العمل تم أستعال طريقة المحلول الهلامي (sol gel) في تحضير اوكسيد الحديد النانوي المطعم بالنحاس والليثيوم والذي يحمل الصيغة الكيميائية Li1−xCuxFe5O8 حيث ان x هي نسبة الاضافة المولية (x =0،0.1،0.2،0.3،0.4،0.5،0.6 و 1) ومن خلال الاحتراق الذاتي للجل المائي والذي حصل عند درجة حرارة 200oC ، ثم بعد ذلك قسمت العينات الى اربع مجاميع ، االمجموعة الاولى وهي التي لم يتم تلبيدها بينما المجاميع الاخرى؛ الثانية والثالثة والرابعة فقد تم تلبيدها بدرجة حرارة 500oC ،700oC و 900oC على التوالي . في هذا العمل تم دراسة البناء البلوري والاطوار البلورية السائدة بوساطة فحص حيود الاشعة السينية وكذلك باستعمل فحص المجهر الالكتروني و فحص الاشعة تحت الحمراء بوساطة موديل فورير الرياضي اما هيئة السطح وتضاريس السطح فقد تم دراستها بأستعمال مجهر القوة الذرية ، فحص الخواص السعوية بوساطة جهاز قياس السعة ، المقاومة والمحث . وبصورة غير مباشرة ومن خلال تلك الفحوصات تم معرفة حجم الوحدة التركيبية للبلورة والكثافة النظرية وثابت الشبيكة وكذلك حجم الحبيبة قد تم قياسها بوساطة فحص حيود الاشعة السينية بينما تشكل الكتل الماكروية المجهرية قد تم فحصه بوساطة المجهر مسح الالكتروني الماسح اما قياس حجم الحبيبات على سطح العينة ومعامل خشونتها قد تم قياسه بوساطه مجهر القوة الذرية و نوع الاواصر التي تربط الذرات في البلورة ونوع الاطوار البلورية قد تم فحصه بوساطة الاشعة تحت الحمراء في حين قياس الخواص السعوية وقابلية التوصيل للتيار الكهربائي المتناوب قد تم بوساطة فحص الخواص السعوية . الدراسة الحالية تركز على قياس الخواص السعوية والتي تاخذ في حسابها تاثير تغيير محتوى النحاس في العينات ودرجة حرارة التلبيد بالاضافة الى تغيير التررد المطبق على العينات من مصدر الجهد الخارجي وكذلك خسارة الطاقة الكهربائية عند مرور التيار الكهربائي في العينات. ER -