TY - JOUR ID - TI - EXPERIMENTAL INVESTIGATION ON ELECTROCHEMICAL MACHINING PARAMETERS دراسة عملية حول متغيرات التشغيل الكهروكيميائي AU - Dhia Ahmed Alazawi ضياء العزاوي PY - 2017 VL - 10 IS - 1 SP - 71 EP - 80 JO - DIYALA JOURNAL OF ENGINEERING SCIENCES مجلة ديالى للعلوم الهندسية SN - 19998716 26166909 AB - The inherent characteristics of electrochemical machining (ECM) have large scale of advantages over the traditional machining technologies. ECM has been employed in this work to machining low carbon AISI1005 steel. Such technique is used to remove the electrical conductive material via a controlled electrochemical anodic reaction regardless of the metal mechanical properties. The considered experiments were conducted to study the effects of process parameters such as applied voltage, electrolyte flow rate, current density on all of weight loss, dissolution rate and material removal rate (MRR) in sodium chloride aqueous solution. The results stated that, the weight loss is in general increased with the voltage and the flow rate as its maximum value was 9.23 g and 5.35g respectively. Increasing the current density has led to obtain maximum MRR and dissolution rate of 0.248g/min and 1.59 mm/min respectively. The results showed that there was an enhancement in the MRR and the dissolution rate so as to be 66.8% and 49.3% respectively.

ان الخصائص الكامنة في التشغيل الكهروكيميائي (ECM)لها نطاق واسع من المزايا بالمقارنة مع تقنيات التشغيل التقليدية. تم توضيف التشغيل الكهروكيميائي في هذا البحث لتشغيل فولاذ منخفض الكاربون نوع AISI 1005 .حيث ان التقنية استخدمت لازالة المعدن الموصل كهربائيا بواسطة تفاعل انودي مسيطر عليه بغص النظر عن الخصائص الميكانيكية للمعدن المشغل. التجارب العملية اجريت لدراسة تاثير عوامل التشغيل مثل الفولتية المسلطة ,معدل جريان المحلول وكثافة التيار على كل من الفقدان في الوزن, معدل الاذابة ومعدل المعدن المزال في محلول كلوريد الصوديوم. النتائج بينت ان الفقدان في الوزان يزداد بشكل عام مع زيادة كل من الفولتية ومعدل جريان المحلول الكهربائي حيث بلغت اقصى قيمة له9.23g و 5.35g على التوالي . زيادة كثافة التيارقد دعت الى الحصول على زيادة قصوى في معدل المعدن المزال ومعدل الاذابة لتصل الى 0.248g/min و 1.59 mm/minعلى التوالي. كذلك ان النتائج بينت معدل التحسن في معدل المعدن المزال ومعدل الاذابة لتصل الى , 66.8%49.3 % على التوالي. ER -