TY - JOUR ID - TI - Experimental and Theoretical Behavior of Reinforced Concrete One Way Slabs Strengthened by Ferrocement Cover at Tension Face AU - Mazan D.Abdullah AU - Alyaa Ali Hassen PY - 2017 VL - 25 IS - 4 SP - 1134 EP - 1150 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - This paper presents a study of the flexural behavior of strengthened reinforced concrete one slabs by ferrocement cover in tension. This study included testing 14 simply supported one way slabs, which include 3 control slabs,11 strengthened slabs. In the strengthened slabs, the effect of the using ferrocement cover on the specimens of avairable depth, the thickness of ferrocement cover, number of wire mesh layers on ferrocement and the compressive strength for mortar on the ultimate load, mid span deflection at ultimate load and cracks pattern were discussed. All reinforced concrete slab specimens were designed of dimensions (1800mm*300mm) with (70-100mm) thickness and reinforced identically to fail in flexure. All slabs have been tested in simply supported conditions subjected to two point loads. The experimental results show that the ultimate loads are increased by about (4.1-15.3%) for the slabs strengthened with ferrocement with respect to the unstrengthened reinforced concrete slab (control slab). Three-dimensional nonlinear finite element analysis has been used to conduct the analytical investigation, ANSYS (Version 14.0) computer program was used in this study. The analytical result from modeling in ANSYS program exhibited a good agreement with experimental results.

يتضمن البحث الحالي دراسة مقاومة الانثناء للبلاطات المقواة والمصلحة باستخدام طبقة الفيروسمنت في منطقه الشد تضمنت الدراسة تهيئة و فحص اربع عشر بلاطة، ثلاثه كبلاطة مرجعية واحدى عشر منها مقواة بالفيروسمنت، وبلاطة واحدة تم أخذهما كبلاطات مرجعية. إن المتغيرات التي تمت دراستها في عملية التقوية هي مدى فعالية الفيروسمنت في تقوية العينات ذات الاعماق المختلفة ، عدد طبقات المشبكات السلكية و مقاومة الانضغاط للفيرو سمنت على الحمل الأقصى والأود المقابل له بالإضافة إلى تأثيرها على انماط الشقوق.صممت جميع البلاطات الخرسانية المستخدمة في هذا البحث بالابعاد (1800*300 ملم)مع سمك(70-90ملم) وتم تسليحها بشكل يضمن فشلها بالانحناء. تم فحص جميع البلاطات في فضاء بسيط الاسناد وبتسليط نقطتين حمل . أظهرت النتائج العملية التي تم الحصول عليها من النتائج المختبرية أن عملية تقوية البلاطات الخرسانية باستخدام لفيروسمنت ادت الى زيادة في قيمة التحمل الاقصى للانحناء للبلاطات (Ultimate Loads) يصل مقدارها بين (4.1-15.3%) مقارنة بالبلاطات الخرسانية غير المقواة باستخدام لفيروسمنت. تم أستعمال التحليل اللاخطي بواسطة العناصر المحددة (Finite Elements) ثلاثية الأبعاد كوسيلة عددية للدراسة والتحري عن سلوك وتصرف هذه البلاطات باستخدام البرنامج (ANSYS الاصدار الرابع عشر). النتائج النظريه من البرنامج( ANSYS) اعطت نتائج جيده مع النتائج العملي . ER -