TY - JOUR ID - TI - The Shrinkage Cracking Behavior in Reinforced Reactive Powder Concrete Walls AU - Niran Mohammed Satiq AU - Samir A. Al-Mashhadi PY - 2017 VL - 25 IS - 4 SP - 1352 EP - 1365 JO - Journal of University of Babylon مجلة جامعة بابل SN - 19920652 23128135 AB - In this study, the reduced scale wall models were used (they are believed to resemble as much as possible the field conditions) to study the shrinkage behavior of reactive powder concrete (RPC) base restrained walls. Six base restrained RPC walls were casted in different length/height ratios of two ratios of steel fiber by volume in Summer. These walls were restrained by reinforced concrete bases to provide the continuous base restraint to the walls.The mechanical properties of reactive powder concrete investigated were; compressive strength between (75.3 – 140.1) MPa, splitting tensile strength between (5.7 – 13.9) MPa, flexural tensile strength (7.7 – 24.5) MPa, and static modulus of elasticity (32.7 – 47.1)GPa.Based on the observations of this work, it was found that the cracks did not develop in the reduced scale of the reactive powder concrete (RPC) walls restrained from movement at their bases for different L/H ratios (2, 5, and 10) and for two ratio of steel fiber (1% & 2%) during 90 days period of drying conditions. Moreover, the shrinkage values increase toward the edges. Based on the results of this work, the increase in the maximum shrinkage values of walls with 1% steel fiber were (29%, 28%, 28%) of the maximum shrinkage values of walls with 2% steel fiber of length/height ratios of (2, 5, and 10) respectively.The experimental observation in beam specimens showed that the free shrinkage, tensile strain capacity and elastic tensile strain capacity (at date of cracking) of beams with 1% steel fiber were higher than the beams with 2% steel fiber by about (24%), (45%) and (42%) respectively

في هذا البحث تم استخدام نماذج بحث مصغرة يعتقد بأنها توفر ظروفا مشابهة للظروف الطبيعية الموقعية لدراسة سلوك الانكماش للجدران المصنوعة من خرسانة المساحيق الناعمة.تم صب ستة جدران لنسب مختلفة من الطول/الارتفاع بوجود ألياف الحديد بنسبتين وقد تم تقييد تلك الجدران بواسطة أساس خرساني. الخواص الميكانيكية للخرسانة التي تضمنها البحث، مقاومة الانضغاط، مقاومة الشد (الانشطار) ،مقاومة الشد (الانحناء)٬ ومعامل المرونة. تراوحت القيم بالنسبة لخرسانة المساحيق الناعمة، مقاومة الانضغاط ( 75٫3-140٫1) ميكا باسكال، مقاومة الشد بالانشطار (7٫7 -24٫5) ميكا باسكال، مقاومة الشد بالكسر( 5٫7 ـ 13٫9) ميكا باسكال، ومعامل المرونة الاستاتيكي ( ٣٢٫7-٤7٫1) كيكا باسكالللأعمار من (3-6٠ يوم). لقد تبين من خلال المراقبة إن جميع هذه الجدران ولهذه النسب من الطول/الارتفاع (10٬5٬٢) لا تبدي تشققا خلال فترة تعرضللجفاف قدرها (90) يوم. وكانت قيم الانكماش غالبا ما تزداد كلما اتجهنا نحو نهايات الجدار. كانت نسب الزيادة في القيم العظمى للانكماش للجدران ذات 1% من ألياف الحديد بحوالي (29%٬ 28%٬ 28%) من القيمة العظمى للانكماش للجدران ذات 2% من ألياف الحديد لنسب الطول إلى الارتفاع (٬2 ٬5 10) على التوالي. وقد بينت النتائج المختبرية للعتبات الخرسانية المقيدة إن الانكماش الحر وانفعال الشد الاقصى وانفعال الشد المرن في وقت حدوث الشق للعتبات ذات 1% من ألياف الحديد أعلى مما هو عليه للعتبات ذات 2% من ألياف الحديد بحوالي (٢4%, 45%و 42٪) على التوالي. ER -