TY - JOUR ID - TI - BUOYANCY EFFECT STUDY ON CONVECTIVE ENHANCEMENT FOR VARIOUS BASE NANOFLUID IN AN ENCLOSURES دراسة تأثير قوة الطفو على تحسين الحمل الحراري لموائع نانوية مختلفة لمحتوى مغلق AU - Salah Mahdi salih Tahsin ali Husain د. تحسين علي حسين م. صلاح مهدي صالح PY - 2017 VL - 17 IS - 2 SP - 365 EP - 381 JO - Iraqi journal of mechanical and material engineering المجلة العراقية للهندسة الميكانيكية وهندسة المواد SN - 20761819 AB - Buoyancy-driven heat transfer convection enhancement in a two-dimensional enclosure, for two cases boundary conditions: (isothermal and linearly varying) temperature differential heated walls utilizing Nano fluid is studied numerically. In this study, three various base fluids (water, ethylene glycol, or oil) based with (CuO) nanoparticles are tested. Calculations of heat transfer rates were accomplished for a range of Rayleigh number (103 ≤Ra≤106), Prandtl number is taken as (Pr = 6.7, 204, and 10959), and solid volume fraction (0 % ≤ϕ≤ 10 %). Numerical computations are carried out for different combinations of relevant parameters involved in the study. Results showed that the heat transfer rate increases by increasing the volume fraction of the Nano fluid for all types of base Nano fluid considered. The increment in average Nusselt number is strongly dependent on the basic fluid and boundary condition chosen. The heat transfer rate also increases with increases of Rayleigh number, and Prandtl number. Based on the present results, oil-base nanoparticle in an enclosure with the isothermal temperature walls is preferable to attain overall heat transfer enhancement. Also, the enhancement in heat transfer with (0.1) solid volume fraction of (CuO) particles based with different basic fluids such as (water, EG, or oil) increases (26.7%, 28.8%, and 32.94%) respectively for low (Ra) as compared to the base fluid. For verification of current study, the results have been compared with the recent studies at the same boundary conditions and are a good agreement.

تم إجراء دراسة عددية لتحسين الحمل الحراري الطبيعي لمحتوى مغلق ثنائي البعد، لحالتين من الظروف الحدية مختلفة :( منتظمة ، متغيرة خطيا) لدرجة حرارة الجدران المسخنة بشكل متباين بأستخدام مائع نانوي. في هذه الدراسة ، تم أختبار ثلاث مواد سائلة اساسية (الماء، أثيلين كلآيكول ، والزيت) موضوعة مع جسيمات دقيقة جد"ا لمسحوق (أكسيد النحاس) . تم تمثيل النتائج العددية لمعدلات انتقال الحرارة لعدد رالي في المدى ( 103≤Ra≤ 106) , التركيز الحجمي (0%≤ϕ≤10%) ، إخذ عدد برانتل ((Pr=6.7, 204, and 10959 .المحاكاة العددية تضمنت أختبار مختلف العوامل المتعلقة بالدراسة. النتائج بينت ان معدل انتقال الحرارة يزداد بزيادة التركيز الحجمي للمائع النانوي لجميع المواد السائلة المدروسة . الزيادة بمعدل عدد نسلت تكون معتمدة بشكل قوي على نوع المادة السائلة الأساسية والظرف الحدي المختار. كذلك معدل انتقال الحرارة يزداد بزيادة عدد رالي و عدد برانتل. على اساس النتائج الحالية ، تبين إن سائل الزيت الموضوع للجسيمات الدقيقة لمحتوى مغلق ذات درجة حرارة منتظمة للجدران هي افضل حالة للحصول على اكبر زيادة لانتقال الحرارة. كذلك، تحسين معدل انتقال الحرارة بتركيز حجمي (ϕ =0.1) و لمسحوق أكسيد النحاس موضوع مع مواد سائلة مختلفة مثل (الماء، أثيلين كلآيكول، والزيت) هو(26.7%, 28.8%, and 32.94%)على التوالي ولعدد رالي واطيء. وللتحقق من النموذج الحالي, تم مقارنة النتائج العددية للدراسة الحالية مع دراسات سابقة عند نفس الظروف الحدية وكانت مقبولة. ER -