@Article{, title={Geological Modeling for Yamama Formation in Abu Amood Oil Field موديل جيولوجي لتكوين اليمامة في حقل ابو عمود النفطي}, author={Medhat E. Nasser مشتاق فلاح حسن and Sameer N. Al-Jawed سمير نوري الجواد and Mushtak F. Hassan مدحت عليوي ناصر}, journal={Iraqi Journal of Science المجلة العراقية للعلوم}, volume={58}, number={2C}, pages={1051-1068}, year={2017}, abstract={3D geological model of a simple petroleum reservoir for Yamama Formation has been built in Abu Amood Oil Field using Petrel software, which is a product of Schlumberger. This model contains the structure, stratigraphy and reservoir properties (porosity and water saturation) in three directions(X, Y and Z).Geologic modeling is an applied science of creating computerized representations of portions of the earth's crust, especially oil and gas fields. Yamama Formation in Abu Amood Oil Field is divided into thirteen zones by using well logs and their petrophysical properties, six of which are reservoir zones. From the top of the formation these six zones are: (YB-1, YB-2, YB-3, YC-1, YC-2 and YC-3). These reservoir zones are separated from each other by barriers, which are of little or no porosity.

تم بناء موديل جيولوجي بسيط لتكوين اليمامة في حقل ابو عامود النفطي بأستخدام برنامج البترل الذي قدمته شركة شلمبرجر النفطية. يشمل هذا الموديل الصفات التركيبية والبيئية والمكمنية المتمثلة بالمسامية والتشبع المائي في ثلاث ابعاد على المحاور الثلاث (Y,XوZ) حيث يعتبر هذا الموديل علم تطبيقي في عمل تمثيل حاسوبي لاجزاء من القشرة الارضية, ولا سيما في حقول النفط والغاز. قُسِم تكوين اليمامة في حقل ابو عامود النفطي الى ثلاثة عشر نطاقاً بأستخدام المجسات البئرية وصفاتها البتروفيزيائية, ستة من هذه الانطقة تعتبر وحدات مكمنية من اعلى التكوين هذه الوحدات هي ( YB-1, YB-2, YB-3, YC-1, YC-2 و YC-3) وهذه الوحدات المكمنية معزولة عن بعضها البعض بطبقات عازلة مع مسامية قليلة او معدومة.} }